2.9.5LAN port
Figure 2.23 LAN port
2.10Setting the Time and Date
Whenever the system timer is not matched with your location or time zone, please reset the time and date by following step:
1.Click START > Control Panel, or START > Settings > Control panel
2.Double click the Date and Time Properties.
3.Select the correct day, month and year.
4.Click OK to save and exit.
2.11Power Management
2.11.1Suspend
To save battery power, or when swapping battery packs, put the
1.Suspend-to-RAM (Standby mode)
In this mode, although power consumption is very low, the battery may drain and cause data loss. If the
Note! The Power LED blinks green. (See chapter 2.3.1)
20 |