![](/images/new-backgrounds/1266736/26673629x1.webp)
13.Gently slide the
14.Lift the display assembly off the computer.
1 | display assembly | 2 | screws (4) |
|
|
|
|
|
|
3 | display cable | 4 |
| |
|
|
|
|
|
|
|
|
|
|
Replacing the Display Assembly
1.Follow the instructions in Before You Begin.
2.Slide the antenna cables in through the slot on the computer base.
3.Place the display assembly in position and replace the four screws that secure the display assembly to the computer base.
4.Connect the display cable to the connector on the system board.
5.Connect the
6.Turn the computer over and route the
7.Connect the
8.Replace the
9.Replace the keyboard (see Replacing the Keyboard).
10.Replace the
11.Replace the battery pack (see Replacing the Battery Pack).
12.Replace the base cover (see Replacing the Base Cover).
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer.