Alienware M17X service manual Removing the Memory Modules, Captive screw, Memory-module door

Removing the Memory Module(s)

1.Follow the instructions in “Before You Begin” on page 6.

2.Remove the battery pack (see “Removing the Battery Pack” on page 11).

3.Remove the compartment door (see “Removing the Compartment Door” on page 14).

4.Loosen the captive screw that secures the memory-module door to the computer base.

5.Slide the memory-module door to release the tabs and lift the memory- module door out of the computer base.

CAUTION: If you need to remove memory modules from both connectors, remove the memory module in the upper connector before you remove the module in the lower connector.

1 captive screw

CHAPTER 7: MEMORY MODULE(S)

1

2

2 memory-module door

028/028