English
40
Restore from backup
You can restore backups previously created (as stated in the Create backup section) from hard disk, CD or DVD.
1Boot to Windows XP.
2Press <Alt> + <F10> to open the Acer eRecovery utility.
3Enter the password to proceed. The default password is six zeros.
4In the Acer eRecovery window, select Recovery actions and click Next.
5Select the desired restore action and follow the onscreen instructions to complete the restore process.
Note: The "Restore C:" item is enabled only if there is a user backup stored on the hard disk (D:\). Please refer to the Create backup section.
Create factory default image CD
When the System CD and Recovery CD are not available, you can create them by using this feature.
1Boot to Windows XP.
2Press <Alt> + <F10> to open the Acer eRecovery utility.
3Enter the password to proceed. The default password is six zeros.
4In the Acer eRecovery window, select Recovery settings and click Next.
5In the Recovery settings window, select Burn image to disk and click Next.
6In the Burn image to disk window, select 01. Factory default image and click Next.
7Follow the instructions on screen to complete the process.
Re-install bundled software without CD
Acer eRecovery stores
1Boot to Windows XP.
2Press <Alt> + <F10> to open the Acer eRecovery utility.
3Enter the password to proceed. The default password is six zeros.
4In the Acer eRecovery window, select Recovery actions and click Next.
5In the Recovery settings window, select Reinstall applications/drivers and click Next.