Chapter 2
System Utilities
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.
To activate the BIOS Utility, press mduring POST (when “Press <F2> to enter Setup” message is prompted on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter
Phoenix TrustedCore(tm) Setup Utility
Information | Main | Security | Boot | Exit |
|
|
|
|
| CPU Type : | Intel (R) Pentium(R) Dual CPU T2310 @ 1.46GHz |
|
| CPU Speed : | 1460 MHz |
|
| IDE1 Model Name : | Hitachi HTS541616J9SA00 |
|
| IDE1 Serial Number : xxxxxxxxxxxxxxxxxxxxxx |
| |
| ATAPI Model Name : Optiarc DVD RW |
| |
| System BIOS Version: | v1.3701 |
|
| VGA BIOS Version: | SantaRosa 1436 |
|
| Serial Number: | xxxxxxxxxxxxxxxxxxxxxx |
|
| Asset Tag Number: |
|
|
| Produce Name: |
|
|
| Manufacturer Name: | Acer |
|
| UUID: | xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx |
|
|
|
|
|
|
|
|
|
F1 Help | Select Item | F5/F6 Change Values | F9 Setup Defaults | |
Esc Exit | Select Menu | Enter Select | F10 Save and Exit | |
|
|
|
|
|
Chapter 2 | 39 |