System Devices
The System Devices screen contains parameters involving your hardware devices. It also provides advanced settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested parameter settings.
Parameter | Description | Options |
|
|
|
Serial Port | Enables, disables or auto detects the serial port | Disabled/Enabled/Auto |
|
|
|
Parallel Port | Enables, disables or auto detects the parallel port | Disabled/Enabled/Auto |
|
|
|
Mode | Sets the operation mode if the parallel port | |
|
|
|
Base I/O address | Set the base I/O address for the parallel port. | 378h/278h/3BCh |
|
|
|
Interrupt | Set the interrupt for the parallel port | IRQ 5/IRQ 7 |
|
|
|
DMA channel | Set the DMA channel for the parallel port | DMA 1/DMA 3 |
|
|
|
Television type | Select TV standard | NTSC/PAL |
|
|
|
PS/2 Mouse | Enables, disables or auto detects the PS/2 | Disabled/Enabled/Auto Detect |
| mouse |
|
|
|
|
Infrared Port (FIR) | Enables, disables or auto detects the infrared | Disabled/Enabled/Auto |
| port |
|
|
|
|
38 | Chapter 2 |