Features

Protective PVC textured magnet cover.

	High-temp voice coil with spun-laced Nomex™ re-inforcment collar.
	Vented spider cavity.
	Tear and fatigue resistant
Optimized motor magnetics	poly-cotton spider.
with extended pole piece and	High density compressed
bumped vented backplate.	High density compressed
	half-roll sealed
Custom insulated 10-AWG	poly-foam surround
nickel plated push terminals.

Rigid die-cast aluminum low profile frame.

Kevlar fiber reinforced semi-pressed paper cone and ABS/Acrylic dustcap assembly.

Decorative aluminum trim ring.

•High modulus closed conical cone and ABS/Acrylic dustcap assembly geometry.

•Kevlar fiber reinforced semi-pressed paper cone.

•Tear & fatigue resistant poly-cotton spider.

•High density compressed half-roll sealed poly-foam surround.

•High temp voice coil with spun-laced Nomex™ insulating reinforcement collar.

•Optimized motor magnetics with extended pole and bumped vented backplate.

•Fatigue resistant and reduced strain "stitched on" flexible lead wire design.

•Multi-point high-temp/high-strength neck joint bonding technique.

•Rigid die-cast aluminum low profile frame.

•Semi-flexible PVC removable protective motor cover.

•Custom insulated/isolated compression input terminal assembly.

•Proprietary spider venting/cooling technique.

•Diamond cut cast aluminum motor cover for improved heat dissipation.