Yamaha DPX-530 Setting up the projector, Setting up your projector, Basic projector setup

Page 12

4Setting up the projector

◆Setting up your projector

Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector as shown below.

•Install the screen and projector so that the projector’s lens is placed at the horizontal position of the screen center.

•Do not install the screen where it is exposed to direct sunlight or lighting. Light directly reflecting on the screen makes the projected images whitish and hard to view.

◆Basic projector setup

Determine the distance from the screen to the projector according to the size of the images to be projected (see page 9).

W

AB

A=B

•Do not place this projector on a carpet or blanket because the exhaust vent and the intake vent on the bottom surface will be blocked and the inside of the projector will overheat, causing a breakdown or fire.

•Depending on the installation conditions, warm air that is emitted from the exhaust vents may flow into the intake vent, causing the projector to display “Over Temperature” and then stop projecting images. If this happens, clear the area around the exhaust vent.

◆Adjusting the projection angle

This projector is provided with three feet for adjusting the projection angle on the bottom surface. Adjust the projection angle depending on the position of the projector.

For the best projection, project images on a flat screen installed at 90 degrees to the floor. If necessary, tilt the projector using the adjustment feet on the bottom of the projector.

Screen

Adjustment feet (rear)

1.Tilt the projector upwards to the appropriate angle.

2.Press the foot adjustment buttons next to the adjustment feet (rear), and the adjustment feet will come out.

3.Release the buttons to lock the adjustment feet (rear) to that position.

4.Rotate the adjustment feet (rear) for fine adjustment.

• If necessary, rotate the adjustment feet (front) for fine adjustment.

After using the projector

Put the adjustment feet (rear) back into the projector by pressing the foot adjustment buttons.

When projected images are distorted to a trapezoid

When the screen and the projector are not placed perpendicularly to each other, projected images become trapezoidal. If you cannot make the projector and the screen perpendicular to each other by mechanical adjustments, adjust keystone (see page 15).

8

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DPX-530 Important Safety Instructions For Canadian customersFCC Information for US customers only USAEuropean compliance notice For U.K. customersIii Brown LiveTable of contents Inappropriate places for installation PreparationAccessory check Cables Power supply partsRemote control Ferrite core set Others Parts Inserting the batteries into the remote control Them correctly, inserting their side firstControls and functions Projector overviewControl area Rear panelRemote control overview Using the picture quality adjusting buttonsBottom side Using the remote control Operational rangeReception angle Setting up the projector Setting up your projectorBasic projector setup Adjusting the projection angleRefer to the following diagram to determine the screen size Screen size and projection distanceConnections Basic home theater system connectionPreparations Connecting to a video player, etc Connecting to a DVD playerWhen a TV tuner or VCR is connected DVI-D connections SUB connectionsConnecting the projector to a computer Plugging in the power cableProjection Viewing video imagesKeystone adjustment To stop projectingIris button Setting the aspect ratio Changing the settingsWith the remote control With the Initial menuViewing computer images When connected to a notebook computer To stop projecting Auto / Auto Sync buttonsMenu Menu overviewHow to set the menus Menu settings Image menuSetup menu Initial menuSignal Menu Adjusting video images Adjusting brightness Contrast and BrightnessAdjusting the white tone to select Color Temp Adjusting the white tone to customize Color TempAdjusting color Saturation and HUE Sharpening or softening images SharpnessLPF Progressive filter Adjusting computer images Simple method to adjust the image positionTo adjust the horizontal position To adjust the vertical positionCeiling installation Dimension Drawings unit mmViewing ceiling mounted projector images Optional partInterval of lamp replacement Replacement part Option / Not includedReplacing the lamp Maintenance Cleaning of the projector and the ventilation slotsCleaning of the lens Reset of the lamp operation timeAttaching a lens filter and cap Attaching a commercially available lens filterAttaching the lens cap Troubleshooting No image appears on the screenImages are not displayed correctly Others Indicators Normal conditionsAbnormal conditions Specifications Projector specificationsSUB 15P DVI-DComposite / S-video signal specifications Component signal specificationsDigital RGB signal specifications Analog RGB signal specificationsConnectors DVI DVI-D 24-pin with HdcpAll rights reserved

DPX-530 specifications

The Yamaha DPX-530 is an innovative and versatile digital projector designed to meet diverse presentation needs. Known for its exceptional image quality and advanced features, the DPX-530 is ideal for corporate, educational, and entertainment environments.

One of the key features of the DPX-530 is its impressive brightness, with a lamp output of approximately 3,200 ANSI lumens. This ensures vivid and clear images even in well-lit rooms, making it suitable for a wide range of settings. The projector utilizes a native XGA resolution of 1024 x 768 pixels, which provides sharp and detailed visuals, ensuring that presentations, videos, and images are displayed with stunning clarity.

The technology incorporated into the DPX-530 includes a 3LCD design, allowing for brilliant color reproduction and dynamic contrast ratios. The color light output is balanced, producing vibrant and lifelike colors that enhance the viewing experience. This feature is particularly beneficial for showcasing graphics and detailed imagery, making the projector a favorite among educators and business professionals alike.

In addition to its excellent image performance, the Yamaha DPX-530 offers a range of connectivity options. It includes multiple inputs such as VGA, composite video, and S-Video, allowing users to connect various devices easily. The inclusion of HDMI connectivity also facilitates the connection to modern digital devices, ensuring compatibility with the latest technology.

Portability is another advantage of the DPX-530. The compact and lightweight design makes it easy to transport and set up in different locations. It is equipped with an automatic keystone correction feature, which helps to maintain a rectangular image even when the projector is not perfectly aligned with the screen. This feature ensures that users can achieve optimal projection angles with minimal effort.

The DPX-530's user-friendly interface further enhances its appeal. The on-screen menus and controls are intuitive and easy to navigate, allowing users to adjust settings quickly based on their preferences. Additionally, the projector includes features like a quick start-up and shut-down time, enabling users to focus on their presentations rather than technical adjustments.

Overall, the Yamaha DPX-530 stands out as a reliable and efficient digital projector, combining powerful performance with user-friendly features. Whether used for business presentations, educational lectures, or home entertainment, its advanced technologies ensure a high-quality visual experience, making it a valuable tool for any environment.
Top Page Image Contents