Yamaha DPX-530 owner manual Preparation, Inappropriate places for installation

Page 6

1Preparation

◆Inappropriate places for installation

If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage the unit itself. Carefully choose the place to install this unit by avoiding the places listed below.

1.Places where the temperature and humidity vary greatly

•Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely low.

•This unit must be used within a temperature range of 41°F (5°C) to 95°F (35°C).

•This unit must be used within a humidity range of 30 to 90%

2.Places without adequate ventilation

•Install this unit with at least 30 cm (1 feet) of ventilation space on the top, right and left, and back.

•Do not cover the ventilation slots of this unit. Covering the slots will obstruct heat dissipation.

•Install this unit on the firm surface.

•Do not cover this unit with a tablecloth, etc.

•Make sure there is nothing to get sucked into the ventilation slots so that the temperature of this unit does not become too high.

•If you are going to install the unit in a rack, be sure to leave space for ventilation to prevent exhaust overheating the unit.

3.Places where it gets dusty

•If the filter is blocked with dust, the temperature of this unit may become too high.

4.Places with too much vibration or impact

•Vibration and impact can damage parts of this unit.

5.Places where this unit gets exposed to water or high humidity

•If this unit is exposed to water of high humidity, it may cause a fire or electrical shock.

6.Unstable places

•If this unit is installed on an unstable or an inclined tabletop, it may fall and cause damage to the unit or personal injury.

7.In close proximity to a radio or stereo

•The unit may interfere with reception if placed in close proximity to a radio or television receiver.

8.Uneven surfaces

•Slanting the projector more than 10° right and left or 15° front and rear may cause problems (such as the lamp exploding).

Warning

• To ensure vivid, high contrast images, make sure that no light other than the projector light falls directly on the screen.

2

Page 5 Page 7
Image 6
Page 5 Page 7
Contents DPX-530 Important Safety Instructions For Canadian customersFCC Information for US customers only USAIii European compliance noticeFor U.K. customers Brown LiveTable of contents Inappropriate places for installation PreparationAccessory check Cables Power supply partsRemote control Ferrite core set Others Parts Inserting the batteries into the remote control Them correctly, inserting their side firstControl area Controls and functionsProjector overview Rear panelRemote control overview Using the picture quality adjusting buttonsBottom side Using the remote control Operational rangeReception angle Basic projector setup Setting up the projectorSetting up your projector Adjusting the projection angleRefer to the following diagram to determine the screen size Screen size and projection distanceConnections Basic home theater system connectionPreparations Connecting to a video player, etc Connecting to a DVD playerWhen a TV tuner or VCR is connected DVI-D connections SUB connectionsConnecting the projector to a computer Plugging in the power cableProjection Viewing video imagesKeystone adjustment To stop projectingIris button With the remote control Setting the aspect ratioChanging the settings With the Initial menuViewing computer images When connected to a notebook computer To stop projecting Auto / Auto Sync buttonsMenu Menu overviewHow to set the menus Menu settings Image menuSetup menu Initial menuSignal Menu Adjusting the white tone to select Color Temp Adjusting video imagesAdjusting brightness Contrast and Brightness Adjusting the white tone to customize Color TempAdjusting color Saturation and HUE Sharpening or softening images SharpnessLPF Progressive filter To adjust the horizontal position Adjusting computer imagesSimple method to adjust the image position To adjust the vertical positionViewing ceiling mounted projector images Ceiling installationDimension Drawings unit mm Optional partInterval of lamp replacement Replacement part Option / Not includedReplacing the lamp Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Reset of the lamp operation timeAttaching a lens filter and cap Attaching a commercially available lens filterAttaching the lens cap Troubleshooting No image appears on the screenImages are not displayed correctly Others Indicators Normal conditionsAbnormal conditions SUB 15P SpecificationsProjector specifications DVI-DDigital RGB signal specifications Composite / S-video signal specificationsComponent signal specifications Analog RGB signal specificationsConnectors DVI DVI-D 24-pin with HdcpAll rights reserved

DPX-530 specifications

The Yamaha DPX-530 is an innovative and versatile digital projector designed to meet diverse presentation needs. Known for its exceptional image quality and advanced features, the DPX-530 is ideal for corporate, educational, and entertainment environments.

One of the key features of the DPX-530 is its impressive brightness, with a lamp output of approximately 3,200 ANSI lumens. This ensures vivid and clear images even in well-lit rooms, making it suitable for a wide range of settings. The projector utilizes a native XGA resolution of 1024 x 768 pixels, which provides sharp and detailed visuals, ensuring that presentations, videos, and images are displayed with stunning clarity.

The technology incorporated into the DPX-530 includes a 3LCD design, allowing for brilliant color reproduction and dynamic contrast ratios. The color light output is balanced, producing vibrant and lifelike colors that enhance the viewing experience. This feature is particularly beneficial for showcasing graphics and detailed imagery, making the projector a favorite among educators and business professionals alike.

In addition to its excellent image performance, the Yamaha DPX-530 offers a range of connectivity options. It includes multiple inputs such as VGA, composite video, and S-Video, allowing users to connect various devices easily. The inclusion of HDMI connectivity also facilitates the connection to modern digital devices, ensuring compatibility with the latest technology.

Portability is another advantage of the DPX-530. The compact and lightweight design makes it easy to transport and set up in different locations. It is equipped with an automatic keystone correction feature, which helps to maintain a rectangular image even when the projector is not perfectly aligned with the screen. This feature ensures that users can achieve optimal projection angles with minimal effort.

The DPX-530's user-friendly interface further enhances its appeal. The on-screen menus and controls are intuitive and easy to navigate, allowing users to adjust settings quickly based on their preferences. Additionally, the projector includes features like a quick start-up and shut-down time, enabling users to focus on their presentations rather than technical adjustments.

Overall, the Yamaha DPX-530 stands out as a reliable and efficient digital projector, combining powerful performance with user-friendly features. Whether used for business presentations, educational lectures, or home entertainment, its advanced technologies ensure a high-quality visual experience, making it a valuable tool for any environment.
Top Page Image Contents