Quick Reference Guide | PC/TS Adapter |
6.4Connection Procedures
Start
Switch PC/ modem off
Establish cable connection on RS232 side of the adapter
Connect MPI/DP connector of adapter to S7/M7/C7 system
Switch PC/ modem on
N | 1st startup? |
| |
| Y |
Start “Set PG/PC interface”
(see 6.2 “General”, RS232 side)
(See 6.2 “General”, MPI/DP side) => Microprocessor in adapter starts to work and switches the Power LED to constant light after blinking three times (see also 6.6 “Function of the Power LED”)
Install adapter
Parameter- ize interface
Close “Set PG/PC interface”
TS adapter?
Y
Check “parameterization” with TS application
Start PG/PC
End
Can be done on installing the STEP 7 Standard Package. If so, check settings now.
N
Parameterization resident in the TS adapter. Reparameterization is possible in direct connection and in modem connection.
LED “Active” indicates that the adapter is active in the MPI/DP network.
PC/TS Adapter | 13 |