Siemens SIMATIC PC Adapter TS Adapter manual

Page 7

Quick Reference Guide

PC/TS Adapter

	Adapter
	MPI/DP connector	LED “POWER”
		LED “POWER”
		LED “ACTIVE”
	RS232 connector	Switch
	RS232 connector	“19.2/38.4 kbps”
		“19.2/38.4 kbps”

Figure 1-3

Adapter

The two adapter types differ with respect to the location of the MPI/DP parameters:

SThe MPI/DP parameters for the PC adapter are set in “Set PG/PC interface”. When opening an online display for the first time, ther parameters are transferred to the PC adapter.

SThe MPI/DP parameters for the TS adapter are set via a Teleservice application and stored permanently on the TS adapter. When opening an online display for the first time, these parameters are activated.

PC/TS Adapter	3
A5E00078070-02

Image 7

Contents Simatic Exclusion of Liability Contents PC/TS Adapter A5E00078070-02 PC Adapter in the System Product DefinitionModem Connection Direct ConnectionAdapter MPI/DP Network Package ComponentsPC adapter Prerequisites for OperationHardware SoftwareProper Usage Connecting the AdapterSafety-related Guidelines Qualified Personnel Cleaning the DeviceMPI/DP side General RemarksPin subminiature D Adapter RS232 sideRXD TXD DTR GND DSR RTS CTS Signals Pin ConfigurationPin Abbre Description Input Viation Output Pin Abbre Description Input Viation Output CTS Pin Abbrevia Description Input Tion Output1st startup? Connection ProceduresOperating the switch Function and Operation of the SwitchFunction of the active LED Function of the Power LEDMeaning Response Designation Technical Specifications PC adapter Technical SpecificationsSafety ESD Supplied PC/TS Adapter Versions Special featuresProduct PC Adapter V3.0 V3.1 V5.0 V5.1 Features of the PC/TS Adapter VersionsSmssend TS Adapter V3.0 V5.0 V5.1 V5.2Approval for USA and Canada ApprovalsUL/CSA approval FM Approval Area of Application Requirements Observing the Installation GuidelinesApprovals for Europe EMC Guidelines Declarations of ConformityPC/TS Adapter Quick Reference Guide