Installation and operation

1.The PCL Series conditioners are the perfect accessories for any rack mount system. Install in the top slot of a standard 19-inch rack, and the 8 switched AC outlets on the rear panel will provide full safety protection to all your rack equipment. These conditioners protect your delicate electronic equipment by combining a high voltage varistor surge and transient suppressor with an RFI/EMI interference filter. The filter helps prevent noise from fluorescent lights, motors, and similar sources of “electronic pollution” from contaminating the AC feed to your senitive video, audio, vtr or computer circuits.

2.Plug Power Cord (7) into a standard grounded 115V outlet

3.Plug sensitive electronic equipment into the 8 Rear Panel Outlets (9)

4.Turn Outlet Power Switch (1) to “ON” position. Lit LED indicates conditioned power to the connected equipment.

5.For discreet illumination of your rack equipment on stage, in studios, and in other dark locations (PCL- 810/815 only), pull the 2 Retractable Rack Lights (2) out and adjust the Dimmer Control (4) for the lamp brightness desired (see fig.1 below). The lights swivel and can be adjusted to the proper angle for your appli- cation. The lamps are supplied with standard 5W night-light bulbs. If you find the heat from the bulbs exces- sive, reduce the setting of the Dimmer Control or substitute lesser wattage bulbs. You can easily replace the bulbs without removing the unit from the rack by unscrewing the cap on the end of each light tube. (Note: Be careful not to push the tubes in while the caps are unscrewed.)

6.The Digital Voltmeter Readout (5) (PCL-815 only) is calibrated to a nominal 117 VAC at the factory. No adjustments are necessary.

7.The Digital Voltmeter Readout (5) automatically displays incoming voltage when the Power Cord (7) is connected.

8.MAXIMUM LOAD: The PCL Series Power Conditioners 8 Rear Panel Outlets are rated at 15 amps total load (or 1800W at 120VAC). If this maximum load is exceeded, the Circuit Breaker (8) will trip, cutting off power to all connected equipment in your rack. If this happens, reduce the load by unplugging one or more units from the power conditioner, and push the circuit breaker to reset it (see fig.2 below).

fig.1

fig.2

PCL815 specifications

The Nady Systems PCL815 is an advanced, reliable, and versatile microphone preamplifier that plays a crucial role in the world of audio production, providing superior sound quality and performance. This preamplifier is designed with both professionals and hobbyists in mind, making it an ideal choice for various applications, including live sound reinforcement, recording studios, and broadcasting.

One of the standout features of the PCL815 is its high-performance microphone preamp, which is built to accommodate both dynamic and condenser microphones. The device offers a gain boost of up to 60dB, ensuring that even the quietest sounds are amplified without distortion. This makes it suitable for capturing a wide range of audio sources, from vocal performances to acoustic instruments.

Additionally, the PCL815 includes a unique low-cut filter that minimizes unwanted low-frequency noise and rumble, enhancing the clarity of the audio signal. The filter can be effectively utilized during live performances or studio recordings, providing greater control over the sound output. Another significant feature is the 48V phantom power supply, which is essential for powering condenser microphones, ensuring that users can operate a variety of mic types without needing additional equipment.

The PCL815 also benefits from a rugged and durable design, built to withstand the rigors of everyday use in professional settings. Its compact size allows for easy integration into various audio setups, whether it's a desktop studio or part of a larger sound system. The device's front panel features easy-to-use controls, including an input level knob and a power indicator, making it user-friendly for individuals at any skill level.

In terms of connectivity, the PCL815 is equipped with XLR and 1/4" TRS input and output jacks, enabling seamless integration with other audio equipment. This flexibility allows users to connect the preamp to mixers, audio interfaces, or directly to recording devices.

In summary, the Nady Systems PCL815 microphone preamplifier stands out with its high-gain performance, low-cut filter, phantom power capabilities, rugged design, and versatile connectivity options. It serves as an excellent tool for achieving professional-quality audio, making it an essential addition for musicians, sound engineers, and audio enthusiasts alike. With its advanced features and user-friendly interface, the PCL815 ensures that users can capture and enhance audio with exceptional clarity and precision.