Peerless Industries PRS-1W, PRS-1S Installation to Extension Column / Ceiling Plate, Skip to step

Installation to Extension Column / Ceiling Plate

NOTE: Refer to accompanying instructions with ceiling plates (sold separately) for installing these models to

1 ceiling.

Screw projector mount assembly (A) onto extension column as shown in figure 1.1.

Tighten swivel stop screw against extension column, flush mount tube or reducer using 4 mm security t-wrench (B) as shown in figure 1.2.

NOTE: Swivel stop screw is used to jam against threads of extension column, flush mount tube or reducer to prevent any excess movement of projector mount assembly (A). Do not overtighten screw; overtightening screw will damage threads making it difficult to separate products.

Skip to step 5.

1 1/2" EXTENSION COLUMN (SOLD SEPARATELY)

(UL LISTED EXT OR AEC SERIES)

A

fig. 1.1

SWIVEL STOP

SCREW

BACK OF

MOUNT

CMJ 455

(SOLD SEPARATELY)

fig. 1.2

4 of 13 ISSUED: 08-15-07 SHEET #: 055-9188-6 06-25-10

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-865-2112 or 708-865-8870.