Projector Bracket Installation

PBM-070L

M8 x12mm Phillips

Head Screws

Projector Bracket

Screwdriver

Projector

M8 x12mm Phillips Head Screws

Step 1. Invert the projector and place it on a soft and flat surface. Step 1. Using a screwdriver, secure the mounting bracket using

	Remove any foot levelers that might possibly prevent the	eight (8) M8 x 12mm Phillips Head screws.
	correct installation of the bracket.	Do not over-tighten these screws. Over-tightening
	Step 2. Locate the eight mounting points located on the bottom of	Do not over-tighten these screws. Over-tightening
		the screws may result in damaging the threaded
	the projector.	the screws may result in damaging the threaded
	the projector.	inserts on the projector.
	Step 3. Line up the mounting points on the projector with the	inserts on the projector.

	mounting holes on the mounting bracket.

Installation Manual

Page - 4 -