Speaker Placement (continued)
It is important for the SI-744 speaker to be positioned correctly, if not placed properly there will be a great reduction in imaging, sound staging and overall performance of the speaker. Refer to this illustration for position of the right and left speakers. The top tweeter should aim towards the front of the theater.
Left Speaker | Right Speaker |
Pre-wiring the Speaker
1.Unpack the speaker cabinet from the shipping box.
2.Run the speaker wires from the terminal cup to an amplifier/receiver. Choose either the default dual channel setup in Wiring Diagram 1 (page 4) or the optional full-speaker setup shown in Wiring Diagram 2 (page 5).
NOTE: The single-channel operation as shown in Wiring Diagram 2 (page 5), the crossover switch must be toggled to the left.
Untape and flip the switch for setup as a single-channel speaker for use in a 5.1 Home Theater (see Wiring Diagram 2 on page 5).
