Specifications
Model: |
|
System Type: | |
|
|
Frequency Response: | |
|
|
Sensitivity: | 88/91dB (2.83V @ 1 Meter) |
|
|
Recommended Power: | |
|
|
Woofers: | Four 4” (102mm) Aluminum Cone |
|
|
Tweeters: | Two 1” (25mm) Silk Dome |
|
|
Crossover Frequencies: | 2,700Hz |
|
|
Crossover Slope: | 12dB/Octave |
|
|
Impedance: | 4 Ohms Combined, 8 Ohms per Channel |
|
|
Cabinet Material: | Medium Density Fiberboard (MDF) |
|
|
Cabinet Finish: | Black |
|
|
Baffle and Grille: | Baffle Black; Grille Black or White. |
| Enclosure sold separately. |
|
|
Cutout Dimensions: | Baffle: |
| (245mm W x 514mm H) |
Finished Dimensions: | 14” W x |
| (356mm W x 699mm H x 89mm D) |
Weight: | 40 lbs. (18.14 Kg) |
|
|
Troubleshooting
Situation: | Probable Cause: | Solution: |
No sound from | Speaker wire not | Make sure wire is connected at |
speakers | connected | both the speaker and the ampli- |
|
| fier observing proper polarity |
No sound from | Speaker selector on | Activate proper selector on |
one speaker | amplifier is not on | amplifier |
| Balance control on receiver | Place balance control in the |
| or | center |
| Speaker wire not | Check all connections at amplifier |
| securely connected | and speakers |
|
|
|
Very little bass | Speakers are wired | Check entire system for proper |
and/or imaging | out of phase | polarity and make adjustments |
|
| as necessary |
|
|
|
7