Sanyo AH-23661 manual Mount the Light-Block Sheet Base, Mount the Top Cabinet and the Lens Cover

Page 5

5

Mount the Light-Block Sheet Base

Mount the Light-Block Sheet Base.

LIGHT-BLOCK

SHEET BASE

HOOKS

LIGHT-BLOCK

SHEET

Light-Block Sheet should be located under the hooks.

HOOKS

Fig-5

6

Mount the Top Cabinet and the Lens Cover

For the Cabinet Fig. 6-1

 

 

 

 

1. Mount the Top Cabinet with 2 screws.

 

2. Mount the Lens Cover.

 

 

 

 

Position the mark "UP" of the Lens Cover on top and

 

push into the cabinet. Turn the Lens Cover

 

clockwise until it is securely locked.

 

{When LNS-W11 (AH-23631) is installed, the Lens

UP

Cover is unnecessary.}

 

 

 

For the Cabinet Fig. 6-2

 

 

 

 

1. Mount the top cabinet with 2 screws.

 

2. Push into the Lens Cover to the Top Cabinet.

 

 

Confirm the top and bottom of the lens cover.

 

 

The part circled in Fig-6-2 should be fitted.

 

 

{When LNS-W11 (AH-23631) is installed, the Lens

 

 

Cover is unnecessary.}

 

 

Turn the projector on and check Lens shift, Zoom and Focus is operating properly.

If Light-Block Sheet interfere with those operations, check if the Light-Block Sheet is set properly. LNS-W11 (AH-23631) cannot adjust the Zoom and Focus at the Remote control or the projector.

Fig-6-1

Fig-6-2

-5-

Image 5
Contents LCD Projector Lens Replacement Procedure Remove the Lens Lens Replacement Procedure For a type CabinetFig-1-1 Fig-1-2 Fig-2Remove the Lens Cover and the Top Cabinet Lens Replacement Procedure For B type CabinetFig-1-1 Remove the Light-Block Sheet BaseFig-4 Fig-3Mount the Top Cabinet and the Lens Cover Mount the Light-Block Sheet BaseFig-6-1 Fig-6-2 For the Cabinet FigFocus Adjustment For LNS-W11 AH-23631