Features, Selecting the Proper Mounting Hardware

PAM-200

Features

Congratulations on the purchase of your new Sony Electronics PAM-200 Projector Mount. The projector mount can be configured for ceiling installations. The PAM-200 features MagnaGuide™ Technology which assists the installer for quicker installation times and peace of mind. The PAM-200 Projector Mount is height adjustable from 9” to 12” to help achieve the perfect viewing height.

ASolid Structure Mounting Points

BSingle Wooden Stud Mounting Points

CCeiling Plate

DM6 x 20mm Security Screw

EAdjustable Suspension Neck

FMagnaGuide™ - Upper Assembly

GM4 x 12mm Security Screw and Star Washer

HLocking Tab

IMounting Hardware

JMagnets

KMagnaGuide™-Lower Assembly

LRadial Glide™ Set Screw

MProjector Plate

Optional Mounting Hardware

NM4 x 12mm Security Head Screw

ONylon Spacer

Selecting the Proper Mounting Hardware

1.Invert the projector and locate the mounting points.

2.Test each size of the screws provided.

3.The correct screws should thread easily into the mounting point and not pull out when pressure is applied.

WARNING: DO NOT OVERTIGHTEN YOUR MOUNTING SCREWS TO THE PROJECTOR CHASIS. USING THE INCORRECT SCREW DEPTH MAY CAUSE DAMAGE TO YOUR PROJECTOR.

Page - 4 -

Installation Manual