Sony PAM-200 installation manual Parts List, Installation Tools

Page 3

PAM-200

Parts List

NOTE: This mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Sony Electronics (800) 222-7669.

NOTE: Please review all WARNING and CAUTION statements (see Page 8) before beginning the installation of the PAM-200.

PAM-200

(Qty 1)

M4 x 10mm

Security Screw

(Qty 3)

M4 x 16mm

Security Screw

(Qty 3)

Installation Tools

Phillips Head Screw Driver Soft Material/ Blanket Tape Measure

Ladder

M3 Security Allen Wrench (Supplied)

¼” Wood Drill Bit – Ceiling Installation (Commercially Available)

#14 X 2” Wood

Screw (Qty 3)

Nylon Spacers (Qty 3)

M4 x 12mm

Security Screw

(Qty 2)

M4 External

Washer (Qty 2)

Portable Drill

Pencil

Stud Finder (Commercially Available)

M5 Security Allen Wrench (Supplied)

Masonry Bit (Commercially Available)

5/16” Masonry Drill Bit – Concrete Installation

(Commercially Available)

Installation Manual

Page - 3 -

Image 3
Contents PAM-200 Universal Projector Mount Installation ManualTable of Contents Installation Tools Parts ListSelecting the Proper Mounting Hardware FeaturesOptional Hardware Attaching the MountCeiling Installation Height AdjustmentSafety Warning Technical SpecificationsConcrete Mounting Contact Sony Electronics Warranty