• Minimizing phosphor | for RGB |
You can use this option to move the screen position to minimize
Follow the steps below.
(1)Select “Screen Orbiter” and press 
.
The “Screen Orbiter” setting screen will appear.
(2)Press 
or 
to select “Mode/Time”.
(3)Select a desired pattern.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every one hour.
Mode: Moves the pattern when the power is turned ON or when you switch between modes.
(4)Press 
or 
to select “Moving Area”.
(5)Press 
or 
to select the range for moving the pattern.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Min.: Pattern moves in small range. (About 5 pixels)
Std.: Pattern moves in moderate range. (About 10 pixels)
Max.: Pattern moves in wide range. (About 15 pixels)
(6)Press 
to store.
*When the Screen Orbiter function is operated in RGB1 mode, some letters at the top, bottom, right or left of the screen may be missed.
• Setting RGB Input Signal Compulsorily (Direct Setting) | for RGB |
You can use this option to switch the setting for RGB input signal. Each time you press 
or 
, one of the available choices appears in the following sequence:
For RGB1 mode:
For RGB2 mode:
Auto: The optimum display is obtained automatically for input signals.
Others: The optimum resolution setting is fixed for each signal.
Press 
to store.
*In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished. Switch to the fixed display when the image is not displayed properly.
English
“Screen Orbiter” setting screen
*
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can adjust the display quality to the value you want within the adjustable range.
Downloaded From |