Installation

PMK 560 • Installation Guide

	IMPORTANT:					the
				.com	for		guide,
	.extron						.
	towww		installation
Go	system			specifications
complete		and
instructions,

The Extron PMK 560 Pole Mount Kit, designed for use with the Extron PoleVault™ System, allows

for easy mounting of PoleVault products to a projector pole. It is used to mount the PoleVault system switcher the associated power supply and an accessory device within an enclosure and below a suspended ceiling.

CAUTION: Maximum load for the PMK 560 is 15 lbs (6.8 kg).

Items included in the kit are:

Covers (2), Base plate (1), Mounting plate (1), Tie wraps and pads (to secure power supply)

4-40 Screws (to mount devices) (3),Cover Screws (4)

NOTE:	For full device installation, configuration,
menus, connector wiring, and operation details of
the PoleVault switcher, see the PoleVault System
Installation Guide, available at www.extron.com.

Mounting Plate

Base Plate

To open, remove 4 cover screws and slide the covers away.

PMK Covers (2)

To install the PMK 560 in a PoleVault system:	Figure 1. PMK 560

1.Remove the four cover screws from the center of the PMK 560 (see figure 1). Slide the two halves apart and remove them from the base plate.

NOTE:	If the PoleVault switcher and its power supply
are already installed, go directly to step 4.

2.	To mount the PoleVault switcher, place the mounting plate, with
	the raised tabs upwards, on the top surface of the switcher and
	pass the two supplied 4-40 x 3/16 inch screws into the top of the
	switcher (see figure 2, B). Secure the mounting plate but do not
	overtighten.
3.	Attach the associated power supply to the base plate with the
	supplied tie wraps and pads, by passing them through the
	appropriate slots and around the power supply (see figure 2 C).
	Tighten until snug.
4.	Loosen the four pipe collar set screws (see figure 2 D), and slide
	the base plate up the pipe until it is touching the suspended ceiling.
5.	Level the base plate and secure it by fully tightening the set screws.

Attach PMK to the projector pole pipe collar with the four 10-32 set screws.

Hook the combined mounting plate and switcher into the base plate and secure with screws.

Attach Mounting plate to the top of the PoleVault switcher.

Attach

Power

Supply

Projector Pole

NOTE: At least three set screws must come in contact

3APOW12V ER MAX

INPUTS 1/2

3/4

PVT IN PVT IN

OUTPUT

HDM

AUDIOL	OU
	T
	R
LINPUT	5
	R

PAGING SENSOR

X+V

PVS	405SA

VOI	T
CELIF

with the pipe.

6. Hook the combined plate and switcher into the PMK 560 base plate

(see figure 2, E). Secure it to the base plate with two screws.

OVER	OUTEAKPUTERST		4/8Ω	L	OUTR		PVS 405D
	DOAMPL
	ORGROUNOT IFIED			AUDIO
	SPSHORND			AUDIO		LAN2	Switcher
PVIR T		Tx Rx G				LAN2	Switcher
		REMORS-2TE				1
S G			32			LAN
							3
							LAN

ATTENTION: Use only supplied screws to avoid damaging the switcher.

Figure 2. Attach the mounting plate to the switcher and secure both to the base plate.

PMK 560 specifications

The Extron Electronics PMK 560 is a high-performance presentation switcher designed to streamline the integration of various multimedia sources in professional AV environments. This device is particularly well-suited for conference rooms, classrooms, and other venues where seamless audio-visual presentations are critical.

One of the main features of the PMK 560 is its ability to manage multiple input sources. The switcher supports a variety of video formats, including HDMI, VGA, and composite video. This versatility makes it an ideal choice for environments where different types of devices will be connected, ranging from laptops to projectors. The PMK 560 also includes scaling capabilities, which ensures that all output content is displayed at optimal resolutions, providing users with high-quality visuals without any loss in fidelity.

Another significant technology incorporated in the PMK 560 is Extron’s unique EDID Manager. This allows users to easily manage Extended Display Identification Data, ensuring that source devices can correctly communicate with display devices. The result is an improved plug-and-play experience, minimizing setup time and reducing the chances of compatibility issues during presentations.

The PMK 560 also boasts built-in audio capabilities, facilitating the management of audio sources alongside video. Users can easily switch between audio inputs, providing flexibility in sound routing. Additionally, the unit features audio embedding and de-embedding functionalities, which are crucial for comprehensive audio-visual control.

In terms of user interaction, the PMK 560 is designed with a user-friendly interface. The device includes an intuitive front panel that simplifies operation, allowing presenters to quickly switch between sources with minimal interruption. Furthermore, the PMK 560 supports external control through RS-232 and TCP/IP, promoting seamless integration with third-party control systems.

Durability and reliability are also key characteristics of the PMK 560. Built with robust materials, this switcher is engineered to withstand the rigors of regular use in demanding environments. The internal cooling systems and airflow design are optimized to prevent overheating, ensuring stable performance even during extended sessions.

In conclusion, the Extron PMK 560 presentation switcher is an excellent solution for users looking for versatility, advanced technology, and ease of use. Its combination of multiple input support, audio management, and robust design makes it a standout choice for any professional AV setup.

PMK 560 • Installation Guide

Installation

To install the PMK 560 in a PoleVault system:

Figure 1. PMK 560

Loosen the four pipe collar set screws (see figure 2 D), and slide

(see figure 2, E). Secure it to the base plate with two screws.

Figure 2. Attach the mounting plate to the switcher and secure both to the base plate.

PMK 560 specifications