Elite Screens exCinema manual Storing the telescopic support rod, Draw the base feet back

Page 7

4.Storing the telescopic support rod:

Properly center the supporting rod in the middle to maintain the weight balance in the box when carrying.

5.Draw the base feet back:

Slightly lift each end of the box in turn rotating the two base feet underneath until they are back into alignment with the box.

6.Storing the screen:

The recommended place for storage would be a corner of the room or in a closet, but the ultimate choice is up to you.

The following points should be noted to assure the sound performance of the screen

1.Never use your hand to touch the screen surface.

2.Never scrabble on the screen with anything.

3.Don't touch the screen with hard or sharp objects.

4.Please use a clean cotton cloth or soft dust brush to remove any dust particles on the screen.

5.The screen material may be cleaned with mild soap and water on a soft cloth

6

Image 7
Contents EzCinema Series Parts Identification New Functions and features of F120 and above modelsExtend the base feet InstallationOpen the box cover Installing the support rodPull up the screen Adjusting the screen Vertical AdjustmentRetract the screen Pulling down the screenPulling out the telescopic support rod Draw the base feet back Storing the telescopic support rodStoring the screen EzCinema Series Dimensions Table Warranty Policy Contact Info