Elite Screens exCinema manual Pulling down the screen, Retract the screen

Page 6

Preparing screen for storage

1.Pulling down the screen:

First, hold the telescopic support rod with the left hand and loosen the locking sleeve counter-clockwise with the right hand. Then shorten the telescoping support rod slowly into the full retracted position and tighten the locking sleeve to secure it in place.

2.Retract the screen:

Remove the pull hook from the support bracket by lifting it about 2 cm up and then hold on to the pull hook and lower the screen gently into the box.

3.Pulling out the telescopic support rod:

After telescoping the small supporting rod to its shortest position and tightening the locking sleeve, take out the supporting rod from the support plate.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents EzCinema Series New Functions and features of F120 and above models Parts IdentificationInstallation Extend the base feetInstalling the support rod Open the box coverPull up the screen Vertical Adjustment Adjusting the screenPulling down the screen Retract the screenPulling out the telescopic support rod Storing the telescopic support rod Draw the base feet backStoring the screen EzCinema Series Dimensions Table Warranty Policy Contact Info
Top Page Image Contents