Installation Instructions | XSM/XTM Series |
Adjusting Roll/Height of Wall Brackets
NOTE: The height adjust wall brackets allow adjustment of
+1/2".
1.Turn to right (tighten) to raise side of screen. (See Figure 11)
2.Turn to left (loosen) to lower side of the screen.
1 | Raises screen | |
| 2 | Lowers screen |
(P) |
|
|
(Screen not shown for clarity) |
| |
Figure 11
Locking XTM Mount (Optional)
1.Add optional security bracket (N) to the mount. (See Figure 12)
2.Add padlock (not included) to complete security.
(XTM Shown) |
(N) |
1 |
2 |
Figure 12
Locking XSM Mount (Optional)
Add padlock (not included) to interface bracket tab to lock the XSM mount. (See Figure 13)
Add padlock |
Figure 13
11