Elite Screens Elite Tripod manual

Fig.1

1

3

2

4

Fig. 2

B.Preparing the tripod screen for projection: Follow the steps below and Fig. 3.

1. Pull the screen handle up vertically and hook the screen handle on the Top Hook.

*Note: Use the Keystone Eliminator to prevent “Keystone Effect” from occurring. Keystone Effect is caused when a projector presents its image at a downward angle causing a trapezoid-shaped image to appear on the screen. The Keystone Eliminator is designed to eliminate that effect by sloping the screen forward.

2.Twist the Vertical Locking Sleeve Ring counter-clockwiseto unlock the current position of the Vertical Extension Bar and raise it as necessary to the desired height.

3.Pull the Screen Height Adjustment Lock/Release tab out (to the left) located just above the Carrying Handle to raise or lower the bottom of the. Once the desired height has been set, push the tab

in to lock the position in place.

1

2

3

Fig. 3

2