Elite Screens Elite Tripod manual Tripod Screen Parts Identification, Setting up the screen

Tripod Screen Parts Identification

Support beam

Vertical

Extension Bar

Screen Material

End cap

Screen case

Top Hook, Keystone Eliminator & Screen Handle

Vertical locking sleeve ring

Carrying handle & Screen height adjustment lock/release tab

Tripod junction

Tripod Support Legs

Using the Screen

A. Setting up the screen:

Follow the steps below and Fig. 1 & 2.

1.Place the screen in an upright position (fig.1) with the legs toward the ground.

2.Deploy the Tripod Support legs by pushing down on the Tripod Junction.

3.Turn the tripod’s screen casing in a 90-degree horizontal position so that the screen casing is now parallel to the ground with the screen handle facing the bottom of the top hook.

4.Completely extend the legs as much as possible so they are stable and position them away from objects that may interfere with their balance. DO NOT stand the tripod on an unstable platform to avoid an injury should the tripod screen collapse.

1