MicroDock II
Quick Reference Guide
The base station pushbuttons are not labelled. The base station |
| Confirm Inlet Setup |
| ||
|
| ||||
is operated by pressing the C pushbutton that is located |
| For initial station activation, ensure the inlets are installed cor- | |||
directly below the option that displays on the LCD. |
| ||||
| rectly. |
|
| ||
Activating the Station |
|
|
| ||
| • Inlet | ||||
1. To activate the station, press and hold C (the left- |
| ||||
| • Inlet | ||||
| most button) until the following screen displays. |
|
| erwise specified when purchased). | |
|
|
| • Inlets | ||
|
|
|
| However, unless specified at purchase, inlets | |
|
|
|
| configured for ambient air. | |
|
|
|
|
| a Warning |
| The normal operation screen then displays. |
| Failed bump tests and calibrations can result if the inlets | ||
|
|
| are not setup correctly. | ||
|
|
| To confirm that the inlets are set correctly, complete the follow- | ||
|
|
| ing: |
|
|
|
|
| 1. | Press C menu to access the user options menu. | |
Deactivating the Station |
| 2. | Press C or | to scroll to InletSetup. | |
To deactivate the station, complete the following: |
| 3. Press C sel to access the inlet 1 screen. | |||
1. | Access the normal operation screen (the station can |
|
|
|
|
| only deactivate from the normal operation screen). |
|
|
|
|
2. | Press C off. |
|
|
|
|
|
|
| 4. | Press the C | to scroll to the inlet 2, 3, 4, and 5 |
|
|
|
| screens. |
|
|
|
|
|
|
|
8
