Extron electronic USFM 100 Recommended Installation Tools, Mount the Base Plate

Page 2

USFM 100 Installation Guide, cont'd

Hardware Included in the Kit

Parts

Qty

Application

¼ - 20 x 2 inch, pan head bolts,

4

Base plate to wall installation

¼ inch Toggle assembly

4

Base plate to wall installation

¼ inch metal washers (47/64 inch OD)

8

Base plate to wall installation

5/16 x 3 inch lag screws

4

Base plate to wall installation

5/16 inch metal washers (11/32 inch ID, 11/16 inch OD)

4

Base plate to wall installation and boom arm

¼-28 x 3/4 inch screw

1

Securing boom arm (top)

¼-20 x 1/2 inch button screws

4

Securing boom arm (extension)

10-32 x 3/8 inch pan head screws

2

Securing boom arm (bottom)

10-32 x ¼ inch set screw,

1

Securing projector pipe

 

 

 

6-32 x ¼ inch button screws

11

Securing covers for boom arm (10)

 

 

Securing device mounting plate (1)

6-32 x ½ inch button screws

4

Securing plastic covers for enclosure

Tie wraps

4

Securing power supply wires

4-40 x ¼ inch pan head screws

2

Securing switcher to plate

 

 

 

Installation

WARNING: Risk of Personal Injury and property damage. Before commencing installation, the wall structure must be examined to determine if it is suitable for the proper installation and support of this product. If needed, the installer should reinforce the wall. Drywalls should have a minimum thickness of 1/2 inch and a maximum thickness of 5/8 inch. Improper installation of this product could lead to serious injury.

The location and type of wall where the USFM 100 is to be installed should be identified before starting installation. This determines the installation method and the type of fasteners used to secure the plate to the wall.

Recommended Installation Tools

Level (24 inch) • Ladder • Tape measure • Stud finder • Drill and drill bits • Phillips screwdriver

Allen hex wrench (5/64 size)

1.Mount the Base Plate

NOTE: Before installation, see the user manual for the display device to determine the proper location and placement of the mount. Take into consideration the projector lens offset, screen size, screen aspect, and projected image throw distance. See page 8 for the dimensions of the USFM 100 (with the projector pipe and UPB 25 attached) to aid in this determination

a.At the desired site, use an edge-to-edge stud finder to locate the center of the wall studs (wood or steel).

Mark each stud location. Minimum joist size should be 2 inches by 4 inches.

ATTENTION: Potential Damage to Property. For secure installation, it is required to attach the base plate to two wall studs, using a minimum of four securing points. Drywall toggles can be used for holes that are not aligned with studs (see figure 3). This product is not intended to be mounted solely to drywall.

b.Hold and level the base plate against the wall. Mark a minimum of four positions (two top, two bottom) using either the mounting slots or the keyholes (slots uppermost) that are on the stud lines (see the + marks in figure 2). Where applicable, mark the mounting holes on the wall for drywall toggles.

2

Image 2
Contents Important Safety Instructions Read all instructions before starting installationMount the Base Plate InstallationRecommended Installation Tools Parts Qty ApplicationFor drywall with steel studs Mount the SwitcherFor drywall with wood studs Attach Switcher to Mounting Plate and Secure to Base Plate Run CablesIf running cable behind the walls Cable the SwitcherIf using a surface raceway or conduit Proceed to stepAttach the Boom Arm, Power Supply, and Projector Hook Boom Arm Over Rail and SecureUsfm 100 Dimensions Aligning the Projector Boom Arm
Related manuals
Manual 8 pages 28.88 Kb

USFM 100 specifications

The Extron Electronic USFM 100 is a cutting-edge universal signal format module designed to enhance audio-visual systems with its versatile capabilities and robust performance. This module is particularly valuable in professional AV environments, offering seamless integration with a range of signal formats for both video and audio applications.

One of the main features of the USFM 100 is its ability to support various signal formats, including HDMI, DisplayPort, and RGB. This adaptability makes it an ideal choice for multi-source setups, allowing users to connect different devices without compatibility issues. The module is equipped with advanced processing technology that ensures high-quality signal conversion, maintaining the integrity of the original content while preventing degradation.

Additionally, the USFM 100 supports high resolutions up to 4K at 60Hz, making it suitable for modern high-definition applications. This capability is crucial for venues that demand exceptional picture clarity and detail, such as conference rooms, classrooms, and professional event spaces. Furthermore, the module features an automatic EDID management function, which simplifies the process of ensuring that different devices communicate effectively and are configured correctly.

The design of the USFM 100 includes robust connectors and flexible mounting options, allowing for easy installation and integration into various AV setups. Its compact form factor makes it a space-efficient solution that can fit into standard racks or be mounted on surfaces without taking up excessive room.

In terms of audio, the USFM 100 supports multi-channel audio formats, ensuring that immersive sound experiences are delivered alongside the video content. This feature is particularly beneficial for presentations, films, or live events where audio-visual synchronization is critical.

Moreover, the module is built with reliability in mind. Extron’s commitment to quality ensures that the USFM 100 can withstand the rigors of regular use in demanding environments.

In summary, the Extron Electronic USFM 100 is a versatile and powerful tool for any AV professional. With its support for multiple signal formats, high-resolution output, automatic EDID management, and robust construction, it is designed to meet the dynamic needs of modern AV systems, making it an invaluable addition to any setup.