Safety Information

1001RB Series

Verify Line, Voltage and Amperage Before Use:

Your new 1001RB Series Bass Amp has been factory

configured for use with:
.·	120	Volt/60Hz 20 Amp circuit for USA & Canada.
.·	230	Volt/50Hz 10	Amp circuit for Europe
.·	& Australia.
.·	100	Volt/50Hz 20	Amp circuit for Japan.
.·	Proper AC circuit for all other countries.

Connecting the amplifier to a line with specifications other than indicated above can create a safety and fire hazard, and may damage the amplifier. If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet.

Verify AC Circuit Capacity Before Use:

The high power output of your amplifier may require heavy current draw under Full-Load conditions. To insure proper performance and avoid potential safety hazards, we recommend connection to line circuits with Amperage specified “as above”. Connecting multiple amplifiers to the same circuit, or connecting the ampli- fier to the same circuit used by other heavy-power devices, such as high-wattage lights, may cause circuit breakers to trip. It is always a good idea to avoid using any audio equipment on the same AC circuit as equip- ment with motors, such as air conditioners or refrigera- tors. This will lessen to possibility of power variation and electrical start-up noise affecting your sound.

Do Not Use Extension Cords:

To avoid safety hazards, use only the power cord supplied with your unit. If a replacement cord is used, make certain that it is of consistent quality and gauge as the original. We do not recommend using extension cords with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately with cords meeting factory specifi- cations.

Handle The AC Power Cord Gently:

When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the amplifier for a considerable length of time, disconnect the plug from the AC outlet.

Do Not Open The Amplifier Enclosure:

There are no user-serviceable components inside this product. Opening the amplifier enclosure may present a shock hazard, and modification to the product will void your warranty. If liquid enters the unit, or any metal object such as a paper clip, wire, or staple accidentally falls inside the enclosure, disconnect the unit from the AC power source immediately and consult an authorized service station.

Unpacking:

The carton and packing materials used in shipping your new amplifier were specially designed to cushion it from the shocks and vibration that occur during transport. We suggest that you save the carton and packing materials for use in shipping, in the event you move, or the amplifier needs repair.

1001RB, 1001RB/115, 1001RB/210 specifications

RBH Sound has long been recognized for their commitment to delivering high-quality audio solutions, and the 1001RB series is no exception. This lineup includes the 1001RB/210, 1001RB/115, and 1001RB models, each offering unique features tailored to meet the demands of professional and home audio enthusiasts alike.

The 1001RB/210 is characterized by its dual 10-inch woofers, designed to produce deep, powerful bass without sacrificing clarity in the midrange and treble frequencies. With a power handling capacity of 1,000 watts peak, it provides ample headroom for dynamic musical passages. The cabinet is constructed from dense, high-quality materials that minimize unwanted resonance, allowing for a clean and accurate sound reproduction. This model is ideal for musicians and sound engineers looking for a robust solution for live performances or studio sessions.

On the other hand, the 1001RB/115 features a single 15-inch woofer, offering a slightly different tonal character. This setup enhances the low-end response, making it particularly well-suited for genres that rely heavily on bass frequencies, such as hip-hop and electronic music. Similarly, it boasts a peak power handling capability of 1,000 watts, ensuring it can handle the demands of intense performance environments. The integrated crossover ensures that frequencies are distributed effectively, enhancing the overall listening experience.

The 1001RB model serves as the foundation of this series, providing a versatile platform capable of adapting to various audio setups. It features advanced amplification technology that ensures efficiency and thermal management, helping to prevent overheating during extended use. Its lightweight design further enhances portability, making it easy for performers to transport between venues.

All models in the 1001RB series incorporate RBH Sound's precise engineering philosophies, ensuring impressive audio fidelity across different environments. Each speaker also includes user-friendly connectivity options, allowing for seamless integration into existing audio systems.

Whether you are a musician seeking reliable stage monitors or an audiophile looking to enhance your home audio experience, the RBH Sound 1001RB series promises to deliver performance, durability, and exceptional sound quality that meets the highest expectations. Overall, this lineup stands out in the competitive audio market, offering solutions that resonate with a wide range of users.