Introduction
Protocols
1
TCP/IP protocols and functionalities
Protocols are the standardized sets of rules for transmitting data on a network. Protocols allow users to gain access to network connected resources.
The print server used on this Brother product supports the TCP/IP (Transmission Control Protocol/Internet Protocol) protocol.
TCP/IP is the most popular set of protocols used for communication such as Internet and
The following TCP/IP protocols are available on this Brother product.
Note
You can configure the protocol settings by using the HTTP (web browser). See Using Web Based Management (web browser) to change the print server settings on page 13.
DHCP/BOOTP/RARP
By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured.
Note
To use the DHCP/BOOTP/RARP protocols, contact your network administrator.
APIPA
If you do not assign an IP address manually (using the BRAdmin software) or automatically (using a DHCP/BOOTP/RARP server), the Automatic Private IP Addressing (APIPA) protocol will automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255.
DNS client
The Brother print server supports the Domain Name Service (DNS) client function. This function allows the print server to communicate with other devices by using its DNS name.
LPR/LPD
Commonly used printing protocols on a TCP/IP network.
Port9100
Another commonly used printing protocol on a TCP/IP network.
mDNS
mDNS allows the Brother print server to automatically configure itself to work in a Mac OS® X Simple Network Configured system. (Mac OS® X 10.3.9 or greater).
5 |