Brother QL-580N Using Apipa to configure the IP address, Using ARP to configure the IP address

Page 35

Appendix A

Using APIPA to configure the IP address

The Brother print server supports the Automatic Private IP Addressing (APIPA) protocol. With APIPA, clients automatically configure an IP address and subnet mask when a DHCP server is not available. The device chooses it's own IP address in the range 169.254.1.0 through to 169.254.254.255. The subnet mask is automatically set to 255.255.0.0 and the gateway address is set to 0.0.0.0.

By default, the APIPA protocol is enabled.

If the APIPA protocol is disabled, the IP address of a Brother print server is 192.0.0.192. However, you can easily change this IP address number to match with the IP address details of your network.

Using ARP to configure the IP address

If you are unable to use the BRAdmin application and your network does not use a DHCP server, you can also use the ARP command. The ARP command is available on Windows® systems that have TCP/IP installed as well as UNIX® systems. To use ARP enter the following command at the command prompt:

arp -s ipaddress ethernetaddress

A

ping ipaddress

Where ethernetaddress is the Ethernet address (MAC address) of the print server and ipaddress is the IP address of the print server. For example:

Windows® systems

Windows® systems require the dash “-” character between each digit of the Ethernet address.

arp -s 192.168.1.2 00-80-77-31-01-07

ping 192.168.1.2

UNIX®/Linux systems

Typically, UNIX® and Linux systems require the colon “:” character between each digit of the Ethernet address.

arp -s 192.168.1.2 00:80:77:31:01:07

ping 192.168.1.2

Note

You must be on the same Ethernet segment (that is, there can not be a router between the print server and operating system) to use the arp -scommand.

If there is a router, you may use BOOTP or other methods described in this chapter to enter the IP address. If your administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems. In which case, you will not need to use the ARP command. The ARP command only works once. For security reasons, once you have successfully configured the IP address of a Brother print server using the ARP command, you can not use the ARP command again to change the address. The print server will ignore any attempts to do this. If you wish to change the IP address again, use Web Based Management

30

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Network USER’S Guide Compilation and publication notice Definitions of warnings, cautions, and notesTrademarks Europe Brother NumbersUSA CanadaTable of Contents Index Appendix aAppendix B Appendix COverview IntroductionManagement utility Network function featuresNetwork printing Router Network printer Peer-to-Peer printing using TCP/IPTypes of network connection Network connection exampleTCP/IP, USB Network Shared printingPort9100 ProtocolsTCP/IP protocols and functionalities DNS clientWeb server Http TelnetConfiguring your network printer 192.168.1.1 192.168.1.2 192.168.1.3 IP addresses, subnet masks and gatewaysIP address How the IP address is assigned to your print serverGateway and router Subnet maskSetting the IP address and subnet mask Windows Using other methods to configure your machine for a network Changing the print server settings Http//192.168.1.2/ if the printer’s IP address is Printing the Printer SettingsHow to print the Printer Settings Click Network ConfigurationOverview Printer driver not yet installed Configuring the standard TCP/IP portFor Windows 2000/XP and Windows Server Other sources of information For Mac OS X 10.3.9 How to choose the printer driverNetwork printing from Macintosh For Mac OS X Mac OS XOther sources of information Driver Deployment Wizard Windows only Troubleshooting Windows XP SP1 users General problemsCD-ROM is inserted, but does not start automatically Windows XP SP2 usersPing ipaddress Network print software installation problemsCheck the following Print job is not printed Printing problemsError during printing Others Protocol-specific troubleshootingWeb Based Management web browser troubleshooting TCP/IP #bootp dgram udp wait /usr/etc/bootpd bootpd Using servicesUsing Dhcp to configure the IP address Using Bootp to configure the IP addressPs -ef grep -v grep grep rarpd Using Rarp to configure the IP address008077310107 BRN008077310107 Ps -ax grep -v grep grep rarpdUNIX/Linux systems Using Apipa to configure the IP addressUsing ARP to configure the IP address Windows systemsLocal SET IP Router Using the Telnet console to configure the IP addressLocal SET IP Address Local SET IP SubnetAppendix a Computer requirements Print server specificationsEthernet wired network Appendix BManagement utilities OpenSSL License Appendix COpen Source Licensing Remarks Open SSL statementsOriginal SSLeay License 10, 13 Index

QL-580N specifications

The Brother QL-580N is a versatile label printer designed for businesses and organizations that require efficient and high-quality labeling solutions. Known for its user-friendly interface and robust printing capabilities, this model stands out in the crowded field of label printers.

One of the main features of the QL-580N is its ability to produce professional-quality labels at impressive speeds. It can print up to 68 labels per minute, significantly reducing the time spent on label creation. The printer supports a wide range of label sizes, offering flexibility for various labeling needs, from shipping labels to file folder labels.

The QL-580N utilizes direct thermal printing technology, eliminating the need for expensive ink or toner. This not only makes it a cost-effective solution but also simplifies maintenance. Users can replace the label rolls easily without having to deal with complicated cartridges, ensuring a hassle-free printing experience.

Connectivity is another strong suit of the QL-580N. It features USB and Ethernet ports, allowing it to be connected directly to a computer or incorporated into a network for shared use. This makes it easier for multiple users within an organization to access the printer, enhancing productivity and efficiency.

A noteworthy characteristic of the Brother QL-580N is its ability to print barcodes and graphics. This feature is crucial for businesses that rely on inventory management and product tracking. The printer supports a variety of barcode formats, enabling users to create labels that meet specific industry requirements.

Additionally, the QL-580N comes with robust software support, providing users with powerful design tools. The included P-Touch Editor software enables easy customization of labels with text, images, and symbols. This adaptability ensures that organizations can create labels that accurately reflect their branding and messaging.

In conclusion, the Brother QL-580N is a powerful label printer that combines speed, quality, and convenience. Its advanced printing technology, extensive connectivity options, and user-friendly software make it an ideal choice for businesses of all sizes looking to streamline their labeling processes. Whether for shipping, inventory management, or organizational tasks, the QL-580N delivers exceptional performance, making it a valuable asset in any professional setting.
Top Page Image Contents