Brother QL-580N manual Appendix a, Using services, Using Dhcp to configure the IP address

Page 33

A

Appendix A

Using services

A service is a resource that can be accessed by computers that wish to print to the Brother print server. The Brother print server provides the following predefined services (do a SHOW SERVICE command in the Brother print server remote console to see a list of available services): Enter HELP at the command prompt for a list of supported commands.

Service (Example)

Definition

BINARY_P1

TCP/IP binary

 

 

Other ways to set the IP address (for advanced users and administrators)

A

For details on how to configure your network printer using the BRAdmin Light utility or Web Based Management (web browser), see Setting the IP address and subnet mask on page 10.

Using DHCP to configure the IP address

The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have a DHCP server in your network, the print server will automatically obtain its IP address from the DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.

Note

If you do not want your print server configured via DHCP, BOOTP or RARP, you must set the boot method to static so that the print server has a static IP address. This will prevent the print server from trying to obtain an IP address from any of these systems. To change the boot method, use BRAdmin application or Web Based Management (web browser).

Using BOOTP to configure the IP address

BOOTP is an alternative to RARP that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running on your host computer (it should appear in the /etc/services file on your host as a real service;

type man bootpd or see your system documentation for details). BOOTP is usually started up via the /etc/inetd.conf file, so you may need to enable it by removing the “#” in front of the bootp entry in that file. For example, a typical BOOTP entry in the /etc/inetd.conf file would be:

#bootp dgram udp wait /usr/etc/bootpd bootpd -i

Depending on the system, this entry might be called “BOOTPS” instead of BOOTP”.

28

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Network USER’S Guide Definitions of warnings, cautions, and notes TrademarksCompilation and publication notice USA Brother NumbersCanada EuropeTable of Contents Appendix B Appendix aAppendix C IndexOverview IntroductionNetwork function features Network printingManagement utility Types of network connection Peer-to-Peer printing using TCP/IPNetwork connection example Router Network printerTCP/IP, USB Network Shared printingTCP/IP protocols and functionalities ProtocolsDNS client Port9100Web server Http TelnetConfiguring your network printer IP address IP addresses, subnet masks and gatewaysHow the IP address is assigned to your print server 192.168.1.1 192.168.1.2 192.168.1.3Gateway and router Subnet maskSetting the IP address and subnet mask Windows Using other methods to configure your machine for a network Changing the print server settings How to print the Printer Settings Printing the Printer SettingsClick Network Configuration Http//192.168.1.2/ if the printer’s IP address isOverview Printer driver not yet installed Configuring the standard TCP/IP portFor Windows 2000/XP and Windows Server Other sources of information How to choose the printer driver Network printing from MacintoshFor Mac OS X 10.3.9 For Mac OS X Mac OS XOther sources of information Driver Deployment Wizard Windows only Troubleshooting CD-ROM is inserted, but does not start automatically General problemsWindows XP SP2 users Windows XP SP1 usersNetwork print software installation problems Check the followingPing ipaddress Printing problems Error during printingPrint job is not printed Protocol-specific troubleshooting Web Based Management web browser troubleshooting TCP/IPOthers Using Dhcp to configure the IP address Using servicesUsing Bootp to configure the IP address #bootp dgram udp wait /usr/etc/bootpd bootpd008077310107 BRN008077310107 Using Rarp to configure the IP addressPs -ax grep -v grep grep rarpd Ps -ef grep -v grep grep rarpdUsing ARP to configure the IP address Using Apipa to configure the IP addressWindows systems UNIX/Linux systemsLocal SET IP Address Using the Telnet console to configure the IP addressLocal SET IP Subnet Local SET IP RouterAppendix a Ethernet wired network Print server specificationsAppendix B Computer requirementsManagement utilities Open Source Licensing Remarks Appendix COpen SSL statements OpenSSL LicenseOriginal SSLeay License 10, 13 Index

QL-580N specifications

The Brother QL-580N is a versatile label printer designed for businesses and organizations that require efficient and high-quality labeling solutions. Known for its user-friendly interface and robust printing capabilities, this model stands out in the crowded field of label printers.

One of the main features of the QL-580N is its ability to produce professional-quality labels at impressive speeds. It can print up to 68 labels per minute, significantly reducing the time spent on label creation. The printer supports a wide range of label sizes, offering flexibility for various labeling needs, from shipping labels to file folder labels.

The QL-580N utilizes direct thermal printing technology, eliminating the need for expensive ink or toner. This not only makes it a cost-effective solution but also simplifies maintenance. Users can replace the label rolls easily without having to deal with complicated cartridges, ensuring a hassle-free printing experience.

Connectivity is another strong suit of the QL-580N. It features USB and Ethernet ports, allowing it to be connected directly to a computer or incorporated into a network for shared use. This makes it easier for multiple users within an organization to access the printer, enhancing productivity and efficiency.

A noteworthy characteristic of the Brother QL-580N is its ability to print barcodes and graphics. This feature is crucial for businesses that rely on inventory management and product tracking. The printer supports a variety of barcode formats, enabling users to create labels that meet specific industry requirements.

Additionally, the QL-580N comes with robust software support, providing users with powerful design tools. The included P-Touch Editor software enables easy customization of labels with text, images, and symbols. This adaptability ensures that organizations can create labels that accurately reflect their branding and messaging.

In conclusion, the Brother QL-580N is a powerful label printer that combines speed, quality, and convenience. Its advanced printing technology, extensive connectivity options, and user-friendly software make it an ideal choice for businesses of all sizes looking to streamline their labeling processes. Whether for shipping, inventory management, or organizational tasks, the QL-580N delivers exceptional performance, making it a valuable asset in any professional setting.
Top Page Image Contents