Wiring the SLS, Mounting the SLS | SpeakerCraft specification

Page 2

SLS Owner’s Manual

WIRING THE SLS

The speaker cable terminals are located under the bottom end cap. To remove the end cap, simply pry it open with your fingers. (Figure 4)

Familiarize yourself with the underside panel of the SLS. Attach the speaker cable to the speaker cable terminals, observing the proper polarity with your amplifier, + to + and – to –. Make sure to connect the right channel to the right speaker and the left channel to the left speaker. (Figure 5)

Figure 4

Figure 5

MOUNTING THE SLS

The SLS utilizes a unique mounting system. First, the Wall Bracket is mounted onto a stud in the wall. Next, the SLS with the attached Speaker Bracket simply slips onto the Wall Bracket, securing the SLS to the wall. (Figure 6) Rubber stops on the back of the speaker cabinet keep it firmly in place while protecting the surface of the wall.

End Cap

Stud

	Drywall
	Wall
	Bracket
J-Box	Speaker
J-Box	Bracket

	Wire
	Hole
	NOTE: Speaker Bracket
	can be mounted to SLS
CAUTION: Wall Bracket	for either vertical or
MUST be mounted to a stud	horizontal placement

SLS One

Figure 6

Installing the Wall Bracket

1)Locate a stud to mount the bracket on.

2)Using drywall screws, mount the bracket to the stud. (Figure 6) Note: When mounting the Wall Bracket, we recommend using a level.

3)If the far right or left mounting holes are used to mount the bracket into a stud, (Figure 6) you can align the middle holes with the J-box to ensure a strong mounting of the speaker. Three large wire holes are available in the Wall Bracket to make routing speaker wire easier.

CAUTION: DO NOT MOUNT BRACKET TO THE J-BOX ONLY. THE BRACKET MUST BE MOUNTED TO A STUD.

4)If a stud is not found in the desired mounting location, the speakers can be mounted directly onto the drywall. CAUTION: Regular drywall screws should NOT be used for this application. We HIGHLY recommend using anchors specifically designed to withstand 15-25 lbs.

SLS specifications

SpeakerCraft SLS is a premier audio solution that combines cutting-edge technology with exceptional design, catering to audiophiles and casual listeners alike. Known for its emphasis on sound quality and versatility, the SLS series provides a robust range of speakers that seamlessly integrate into any home or commercial audio setup.

One of the main features of the SpeakerCraft SLS line is its impressive sound fidelity. The SLS speakers are engineered to deliver a rich, full-range audio experience. This is accomplished through the use of high-quality components, including custom-designed drivers and advanced crossover technology. By effectively managing frequencies, the SLS speakers ensure that highs are crisp, mids are smooth, and lows are powerful, creating an immersive listening experience.

In addition to sound quality, the SLS series is notable for its innovative technologies. SpeakerCraft employs advanced waveguide technology that enhances dispersion, allowing sound to fill larger spaces evenly. This means that even in expansive rooms, listeners will enjoy consistent acoustic performance, eliminating dead spots and ensuring that every seat in the room is the best seat.

Another characteristic that sets the SLS series apart is its aesthetic flexibility. Designed with versatility in mind, the speakers can be easily integrated into a variety of environments. Whether the setup is a sleek modern home theater or a traditional living room, the SLS speakers can complement any decor. They are available in various finishes and can be installed as in-wall or in-ceiling options, allowing for customizable and discreet placement.

Durability is also a key focus in the design of SpeakerCraft SLS speakers. Constructed with high-quality materials, these speakers not only promise longevity but also maintain performance even in challenging acoustic environments. The cabinets are built to minimize resonance, ensuring that the sound produced is clean and accurate.

To further enhance the user experience, the SLS series is compatible with a range of home automation systems, making it easy to integrate into smart home setups. This compatibility allows for seamless control over audio settings via smartphones or centralized control systems, bringing convenience to users.

In conclusion, the SpeakerCraft SLS series stands out in the audio market for its superior sound quality, innovative technologies, aesthetic versatility, and durability. These features make it an excellent choice for anyone looking to elevate their audio experience in any setting. Whether for entertaining guests, enjoying movies, or listening to music, the SLS speakers promise an exceptional auditory journey.