Speaker Specifications

Page 4		SLS Owner’s Manual
SPEAKER SPECIFICATIONS
	SLS One	SLS Two
Speaker Type:	2-Way Ported On-Wall	2-Way Ported On-Wall
Tweeter:	Pivoting 1" Aluminum Dome	Pivoting 1" Aluminum Dome
Woofers:	Two 3" Aluminum Cone Midbass	Four 3" Aluminum Cone Midbass
Impedance:	8 ohms	8 ohms
Sensitivity:	87dB 1W/1m	89dB 1W/1m
Frequency Response:	80Hz - 20kHz ± 3dB	80Hz - 20kHz ± 3dB
Power Handling:	5 - 75 watts (undistorted)	5 - 100 watts (undistorted)
Magnetically Shielded:	Yes	Yes
Dimensions (H x W x D):	183⁄16" x 87⁄8" x 51⁄4" (with rear rubber stops)	26" x 87⁄8" x 51⁄4" (with rear rubber stops)
Weight:	15 lbs	25 lbs

In our attempt to constantly improve our products, features and specifications are subject to change without notice.

LIMITED LIFETIME WARRANTY

SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Dealer.

Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is preferable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the pur- chaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability for such modification. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping pro- cedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been autho- rized or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial Number on the product has been removed, tampered with or defaced.

This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any inciden- tal or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc.

Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.

All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limita- tion on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional. Contact your authorized SpeakerCraft Dealer for more information.

For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.

940 Columbia Avenue, Riverside, CA 92507	SpeakerCraft	®
940 Columbia Avenue, Riverside, CA 92507
(800) 448-0976 Fax (951) 787-8747
(800) 448-0976 Fax (951) 787-8747
www.speakercraft.com	LIT83000

SLS specifications

SpeakerCraft SLS is a premier audio solution that combines cutting-edge technology with exceptional design, catering to audiophiles and casual listeners alike. Known for its emphasis on sound quality and versatility, the SLS series provides a robust range of speakers that seamlessly integrate into any home or commercial audio setup.

One of the main features of the SpeakerCraft SLS line is its impressive sound fidelity. The SLS speakers are engineered to deliver a rich, full-range audio experience. This is accomplished through the use of high-quality components, including custom-designed drivers and advanced crossover technology. By effectively managing frequencies, the SLS speakers ensure that highs are crisp, mids are smooth, and lows are powerful, creating an immersive listening experience.

In addition to sound quality, the SLS series is notable for its innovative technologies. SpeakerCraft employs advanced waveguide technology that enhances dispersion, allowing sound to fill larger spaces evenly. This means that even in expansive rooms, listeners will enjoy consistent acoustic performance, eliminating dead spots and ensuring that every seat in the room is the best seat.

Another characteristic that sets the SLS series apart is its aesthetic flexibility. Designed with versatility in mind, the speakers can be easily integrated into a variety of environments. Whether the setup is a sleek modern home theater or a traditional living room, the SLS speakers can complement any decor. They are available in various finishes and can be installed as in-wall or in-ceiling options, allowing for customizable and discreet placement.

Durability is also a key focus in the design of SpeakerCraft SLS speakers. Constructed with high-quality materials, these speakers not only promise longevity but also maintain performance even in challenging acoustic environments. The cabinets are built to minimize resonance, ensuring that the sound produced is clean and accurate.

To further enhance the user experience, the SLS series is compatible with a range of home automation systems, making it easy to integrate into smart home setups. This compatibility allows for seamless control over audio settings via smartphones or centralized control systems, bringing convenience to users.

In conclusion, the SpeakerCraft SLS series stands out in the audio market for its superior sound quality, innovative technologies, aesthetic versatility, and durability. These features make it an excellent choice for anyone looking to elevate their audio experience in any setting. Whether for entertaining guests, enjoying movies, or listening to music, the SLS speakers promise an exceptional auditory journey.

LIMITED LIFETIME WARRANTY

SLS specifications