Installation Considerations

Prior to the actual installation of the speakers, it will be necessary to run cables to the speaker location. See your Authorized SpeakerCraft dealer for more information on cable installation. After the cable has been installed, you are ready to mount the speakers.

Preparation for and mounting of the speakers can happen at two different stages. If you are building a new ceiling, follow the section titled INSTALLATION PREPARATION - NEW CONSTRUCTION. If you are placing the speakers into an existing ceiling, follow INSTALLATION PREPARATION - FINISHED CEILING. There are different considerations for each application. Please care- fully follow the recommendations for your application.

INSTALLATION PREPARATION - NEW CONSTRUCTION

When installing the speakers into a newly built ceiling, please follow these instructions carefully:

1. Determine Placement

Determine where in the ceiling the speakers will be placed using the recommendations under SPEAKER PLACEMENT. Pay careful attention to the section on avoiding obstructions.

2. Mount InstaLLock Bracket

For best results, mount the SpeakerCraft InstaLLock New Construction Brackets for the AccuFit CRS7 Series (Part No. BKT90611) following the instructions included with the bracket.

3. The Location is Ready for Drywall

The bracket provides a stable opening around which the drywall installer can cut out an opening, providing a perfect location for installation of the AccuFit CRS7 Series speaker.

INSTALLATION PREPARATION - FINISHED CEILING

When the speakers will be installed into a finished ceiling, please follow these instructions carefully:

1. Determine Placement

Determine where in the ceiling the speakers will be placed using the recommendations under SPEAKER PLACEMENT. Pay careful attention to the section on avoiding obstructions.

2. Locate Obstructions

Find the joists nearest the desired speaker mounting location. The use of a good stud-finder tool is highly recommended for this procedure. Make sure that there are no joists or obstructions where you plan to install the speaker. Read “Checking for Obstructions” under the section SPEAKER PLACEMENT.

3. Trace Template

Place the cut-out template at the location you have decided to place the speaker. Use a few pieces of tape or small tacks to hold the template in place. Trace an outline on the ceiling with a pencil.

4. Cut the Hole

CAUTION: This is the most important part of the entire installation. If you are not certain whether or not an obstruction exists behind the desired mounting area, you should start by cutting a small hole in the center of your penciled mounting hole with a drywall saw. Cut at a 45˚ angle towards the inside of the hole (See Figure 3). Cutting the small hole at this angle will make drywall repair much easier as the piece cut out can be installed neatly back into the hole. Once you have determined there are no obstructions in your desired mounting location, start cutting the finished hole at a 90˚ angle to the ceiling surface.

SIDE VIEW OF CEILING

First Cut

Figure 3

Second Cut

CRS7 specifications

The SpeakerCraft CRS7 is a standout in the world of in-wall speakers, designed to deliver high-fidelity audio while maintaining a discreet presence in any living space. True to the brand's reputation for quality and innovation, the CRS7 speaker combines advanced technology with user-friendly features, making it an ideal choice for both home theater enthusiasts and casual listeners.

One of the main features of the CRS7 is its custom-engineered, 7-inch polypropylene woofer. This driver is designed to provide a robust bass response that complements the higher frequencies produced by its accompanying tweeter. The CRS7 incorporates a 1-inch titanium dome tweeter, which is notable for its ability to produce crisp, clear highs. Together, these components create a well-balanced sound signature, making the CRS7 suitable for a variety of audio applications, from movies to music.

The CRS7 also includes a unique swing-out mounting bracket, allowing for easy installation and secure placement within the wall. This feature minimizes distortion and optimizes sound quality, regardless of the mounting location. Additionally, the speaker's magnetic grille offers a sleek and unobtrusive aesthetic, ensuring that the CRS7 seamlessly integrates into any interior design.

Another significant characteristic of the CRS7 is its frequency response range, spanning from 50 Hz to 20 kHz. This broad range ensures that listeners can enjoy both the low-end thump of action-packed films and the delicate nuances of classical music with clarity and depth. Moreover, the speaker's power handling capacity of up to 125 watts allows it to perform well even in larger spaces, delivering sound that fills the room.

One of the standout technologies in the CRS7 is its carefully calibrated crossover network. This network ensures that sound frequencies are distributed evenly between the woofer and tweeter, optimizing audio performance and creating an immersive listening experience. The CRS7 is also designed for compatibility with a variety of amplifiers and receivers, making it a versatile addition to existing audio systems.

In conclusion, the SpeakerCraft CRS7 in-wall speaker offers exceptional sound quality, aesthetic appeal, and ease of installation. With features like a robust woofer, precision tweeter, and advanced crossover technology, it stands out as a premium choice for anyone looking to enhance their audio experience without compromising on style or space. Whether you're a film aficionado or simply enjoy high-quality music, the CRS7 provides a perfect blend of performance and elegance.