SpeakerCraft CRS7 owner manual Specifications, Limited Lifetime Warranty

Page 5

SPECIFICATIONS

 

AccuFit CRS7 Three

AccuFit CRS7 One

Speaker Type:

2 Way Shallow-Depth, fully

2 Way Shallow-Depth, fully

 

sealed Steel Enclosure

sealed Steel Enclosure

Tweeter:

34" Aluminum

34" Resin coated Silk Dome

 

Dome Tweeter

Tweeter

Woofer:

7" Aluminum Cone Woofer

7" Polypropylene Cone Woofer

Impedance:

8 ohms

8 ohms

Sensitivity:

92dB 1W/1m

92dB 1W/1m

Frequency Adjustments:

Front-Mounted Treble Switch

None

 

allows the Treble to be set at one

 

 

of 3 positions: –3dB, Flat, +3dB

 

Frequency Response:

50Hz - 20kHz

50Hz - 20kHz

Power Handling:

5-125 watts

5-100 watts

Cut Out Dimensions:

8 14"

8 14"

 

(209.55mm)

(209.55mm)

Dimensions (Diameter x Depth):

9 78" x 2 34"

9 78" x 2 34"

 

(250.82mm x 70mm)

(250.82mm x 70mm)

In our attempt to constantly improve our products, features and specifications are subject to change without notice.

LIMITED LIFETIME WARRANTY

SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Dealer.

Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is pref- erable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability for such modi- fication. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial Number on the product has been removed, tampered with or defaced.

This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any incidental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.

All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limitation on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional. Contact your authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.

4

Image 5
Contents AccuFit CRS7 Introduction Speaker PlacementInstallation Preparation Finished Ceiling Installation ConsiderationsInstallation Preparation NEW Construction Adjusting the Frequency Response Speaker InstallationSelecting the Treble Setting on AccuFit CRS7 See Figure Frequency SettingsLimited Lifetime Warranty SpecificationsLIT69700rev1

CRS7 specifications

The SpeakerCraft CRS7 is a standout in the world of in-wall speakers, designed to deliver high-fidelity audio while maintaining a discreet presence in any living space. True to the brand's reputation for quality and innovation, the CRS7 speaker combines advanced technology with user-friendly features, making it an ideal choice for both home theater enthusiasts and casual listeners.

One of the main features of the CRS7 is its custom-engineered, 7-inch polypropylene woofer. This driver is designed to provide a robust bass response that complements the higher frequencies produced by its accompanying tweeter. The CRS7 incorporates a 1-inch titanium dome tweeter, which is notable for its ability to produce crisp, clear highs. Together, these components create a well-balanced sound signature, making the CRS7 suitable for a variety of audio applications, from movies to music.

The CRS7 also includes a unique swing-out mounting bracket, allowing for easy installation and secure placement within the wall. This feature minimizes distortion and optimizes sound quality, regardless of the mounting location. Additionally, the speaker's magnetic grille offers a sleek and unobtrusive aesthetic, ensuring that the CRS7 seamlessly integrates into any interior design.

Another significant characteristic of the CRS7 is its frequency response range, spanning from 50 Hz to 20 kHz. This broad range ensures that listeners can enjoy both the low-end thump of action-packed films and the delicate nuances of classical music with clarity and depth. Moreover, the speaker's power handling capacity of up to 125 watts allows it to perform well even in larger spaces, delivering sound that fills the room.

One of the standout technologies in the CRS7 is its carefully calibrated crossover network. This network ensures that sound frequencies are distributed evenly between the woofer and tweeter, optimizing audio performance and creating an immersive listening experience. The CRS7 is also designed for compatibility with a variety of amplifiers and receivers, making it a versatile addition to existing audio systems.

In conclusion, the SpeakerCraft CRS7 in-wall speaker offers exceptional sound quality, aesthetic appeal, and ease of installation. With features like a robust woofer, precision tweeter, and advanced crossover technology, it stands out as a premium choice for anyone looking to enhance their audio experience without compromising on style or space. Whether you're a film aficionado or simply enjoy high-quality music, the CRS7 provides a perfect blend of performance and elegance.