Introduction, Speaker Placement | SpeakerCraft IW7 specification

INTRODUCTION

Congratulations on purchasing SpeakerCraft’s AccuFit IW7 Series of architectural loudspeakers. The AccuFit IW7 Series features sa shallow 2 3⁄4" sealed steel enclosure. Speakercraft offers the AccuFit Series to address space limitations, building codes, sound transfer to adjoining walls and living environment concerns. The AccuFit IW7 Series of shallow depth, fully enclosed speakers ensure that the drivers have the proper amount of air space to deliver the best performance regardless of the installation envi- ronment. This new line of technical advanced speakers was designed to fit just about any installation application.

SPEAKER PLACEMENT

Best results are achieved when the left, right channel speakers are all the same distance away from the listener. The front left and right speakers should be placed so that they form an equilateral triangle, with the listener at one point and each speaker at the other two. (Figure 1) Ideal sound will be achieved when the tweeters are placed at ear level or slightly higher. If the speakers are positioned far away from the primary listening area, adjust the pivoting tweeters so they are pointed toward the primary listening area. NOTE: To avoid possible damage to the pivoting tweeters, read the section entitled “SPEAKER ADJUSTMENTS” in this manual prior to performing the tweeter adjustment.

INSTALLATION CONSIDERATIONS

Before installing your speakers into the wall, you should consider the placement carefully, taking into account the location of electrical, plumbing and other fixtures. Contact your dealer for assistance if you are not sure of the best location in your par- ticular room environment.

MOUNTING SURFACE PREPARATION

New Construction – Unfinished Walls

Figure 1

A New Construction Bracket (available from your dealer), may be installed prior to drywall application across studs (up to 24" on-center) where a speaker will be located. Insulation material should be in place prior to installing drywall. After the hole is cut and the drywall is installed, the speakers are then easily installed following the instructions for mounting in “Finished Walls” below.

Figure 2

Finished Walls

Prior to the actual installation of the speakers, it will be necessary to run cables to the speaker locations. See your dealer for more information about cable installation. After the cable has been properly installed, you are ready to mount the speakers. Following the simple steps listed below will result in a professional looking installation:

1.Determine the best area to mount your speakers. This area of the wall should be free of obstructions such as electrical conduit, HVAC ducts, or water lines. This can best be determined by noting the placement of fixtures and gaining access to an attic or crawl space for further analysis of the location of such obstacles.

2.Find the studs nearest the desired speaker mounting location. We highly recommend using a good stud-finder tool for this procedure. If you are lining up the speakers to some other object or molding in the room, make sure you consider the size of the baffle flange which extends beyond the mounting hole on all four sides.

3.Mark the hole. A template for setting the hole is provided in the box (along with one paint mask insert for use when painting). Position the template in the desired position and pencil an outline on the wall.

4.Cutting the hole. CAUTION: This is the most important part of the entire installation. If you are not certain whether any obstructions exist behind the desired mounting area, you should start by cutting a small hole in the center of your penciled mount- ing hole with a drywall saw. Cut at a 45º angle towards the inside of the hole (Figure 2). Cutting the small hole at this angle will make drywall repair much easier as the piece cut out can be installed neatly back into the hole. Once you have deter- mined there aren’t any obstructions in your desired mounting location, start cutting the finished hole at a 90º angle to the wall surface.

Mounting Feet							Flange

Figure 3

IW7 specifications

The SpeakerCraft IW7 is a cutting-edge in-wall speaker system designed to deliver exceptional sound quality while seamlessly integrating into any home environment. Tailored for music enthusiasts and audiophiles, the IW7 combines innovative technology with a sleek design, making it an ideal choice for those who value both aesthetics and powerful audio performance.

One of the standout features of the IW7 is its advanced speaker technology. It incorporates a high-performance woofer that delivers rich, deep bass, coupled with a precision-engineered tweeter for crisp, clear highs. This combination ensures a balanced sound profile across all frequency ranges, making it perfect for various audio applications, from music playback to movie soundtracks.

Another significant characteristic of the IW7 is its innovative design that allows for easy installation within walls. This feature not only saves space but also enhances the overall aesthetic of a room by eliminating the need for bulky, freestanding speakers. The IW7's ultra-slim profile makes it an unobtrusive addition to any interior, allowing homeowners to enjoy high-fidelity sound without compromising on style.

The IW7 is equipped with cutting-edge technology, such as the patented Reflective Back Wave design. This innovation minimizes sound distortion and optimizes sound dispersion within the room. Additionally, the speaker features an adjustable tweeter that allows users to direct sound towards the seating area, resulting in a more immersive listening experience.

Durability is also a key aspect of the IW7's construction. The speaker is built with high-quality materials that ensure longevity and consistent performance over time. Its moisture-resistant design makes it suitable for installation in areas prone to humidity, such as bathrooms or kitchens, providing versatility for audio hunters.

Moreover, the IW7 is designed for compatibility with various home audio systems, allowing for seamless integration into existing setups. With that in mind, it supports both multi-room audio configurations and surround sound systems, providing flexibility for users looking to create a comprehensive audio environment.

In conclusion, the SpeakerCraft IW7 offers an exceptional blend of performance, design, and versatility. With its advanced speaker technologies, sleek installation capabilities, and durability, it is an excellent choice for anyone looking to elevate their audio experience while maintaining the elegance of their living spaces.