SpeakerCraft IW7 owner manual Specifications, Limited Lifetime Warranty

Page 4

SPECIFICATIONS

 

AccuFit IW7 Three

Speaker Type:

2 Way with a Shallow-Depth, fully

 

sealed Steel Enclosure

Tweeter:

Pivoting 1" Aluminum

 

Dome Tweeter

Woofer:

7" Aluminum Cone Woofer

Impedance:

8 ohms

Sensitivity:

91dB 1W/1m

Frequency Adjustments:

Front-Mounted Treble Switch allows

 

the Treble to be set at one of 3 posi-

 

tions: –3dB, Flat, +3dB

Frequency Response:

40Hz - 20kHz

Power Handling:

5-125 watts

Cut Out Dimensions (H x W):

12 34" x 8 116"

 

(323.8mm x 206.3mm)

Dimensions (H x W x D):

14 12" x 9 78" x 2 34"

 

(368.3mm x 250.8mm x 70mm)

AccuFit IW7 One

2 Way Shallow-Depth, fully sealed Steel Enclosure

Pivoting 1" Resin coated Silk Dome Tweeter

7" Polypropylene Cone Woofer

8ohms 90dB 1W/1m None

40Hz - 20kHz

5-100 watts

12 34" x 8 116" (323.8mm x 206.3mm)

14 12" x 9 78" x 2 34"

(368.3mm x 250.8mm x 70mm)

In our attempt to constantly improve our products, features and specifications are subject to change without notice.

LIMITED LIFETIME WARRANTY

SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Dealer.

Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is pref- erable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability for such modi- fication. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial Number on the product has been removed, tampered with or defaced.

This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any incidental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.

All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limitation on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional. Contact your authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.

940 Columbia Ave., Riverside CA 92507 USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 www.speakercraft.com

LIT68700(rev1)

Image 4
Contents AccuFit IW7 Speaker Placement Installation ConsiderationsIntroduction Mounting Surface PreparationSpeaker Adjustments Speaker InstallationPainting the Speakers Specifications Limited Lifetime Warranty

IW7 specifications

The SpeakerCraft IW7 is a cutting-edge in-wall speaker system designed to deliver exceptional sound quality while seamlessly integrating into any home environment. Tailored for music enthusiasts and audiophiles, the IW7 combines innovative technology with a sleek design, making it an ideal choice for those who value both aesthetics and powerful audio performance.

One of the standout features of the IW7 is its advanced speaker technology. It incorporates a high-performance woofer that delivers rich, deep bass, coupled with a precision-engineered tweeter for crisp, clear highs. This combination ensures a balanced sound profile across all frequency ranges, making it perfect for various audio applications, from music playback to movie soundtracks.

Another significant characteristic of the IW7 is its innovative design that allows for easy installation within walls. This feature not only saves space but also enhances the overall aesthetic of a room by eliminating the need for bulky, freestanding speakers. The IW7's ultra-slim profile makes it an unobtrusive addition to any interior, allowing homeowners to enjoy high-fidelity sound without compromising on style.

The IW7 is equipped with cutting-edge technology, such as the patented Reflective Back Wave design. This innovation minimizes sound distortion and optimizes sound dispersion within the room. Additionally, the speaker features an adjustable tweeter that allows users to direct sound towards the seating area, resulting in a more immersive listening experience.

Durability is also a key aspect of the IW7's construction. The speaker is built with high-quality materials that ensure longevity and consistent performance over time. Its moisture-resistant design makes it suitable for installation in areas prone to humidity, such as bathrooms or kitchens, providing versatility for audio hunters.

Moreover, the IW7 is designed for compatibility with various home audio systems, allowing for seamless integration into existing setups. With that in mind, it supports both multi-room audio configurations and surround sound systems, providing flexibility for users looking to create a comprehensive audio environment.

In conclusion, the SpeakerCraft IW7 offers an exceptional blend of performance, design, and versatility. With its advanced speaker technologies, sleek installation capabilities, and durability, it is an excellent choice for anyone looking to elevate their audio experience while maintaining the elegance of their living spaces.