CD PLAYER UNIT
1. CD display
2. Repeat button
3. Random button
4. Program button
5. CD power on/off button
6. Previous track button
7. Next track button
8.Play/pause button
9.Stop/eject button
CD PLAYER OPERATION
1.Select CD mode with LINE selector switch.
2.Press POWER button on CD player.
3.Load disc (label side up) into player and PLAY begins automatically.
4.Press PAUSE button and symbol ll appears in the display and play is suspended. Press PAUSE button again to resume play.
5.Pressing 
button selects the next track and 
button the previous track.
6.Press the RANDOM button, random appears in the display and tracks are played in random
sequence.
7.Press the REPEAT button once and symbol 
appears on the display and the current track
is repeated. When the button is pressed twice the symbol 
appears and indicates repeat play of the disc. To cancel these functions press the REPEAT button again.
8.Programming the CD player – in STOP mode.
(a)Press the PROGRAM button
(b)Use the next 
or previous 
button to select a track.
(c)Press REPEAT button to activate memory of the selected tracks in your program. Repeat stages (b) and (c) to continue programming.
(d)Press the PLAY button to start the program (Note: The program repeats itself until the CD player is stopped).
CASSETTE PLAYER UNIT
1. Eject switch
2. Cassette slot
3. Direction indicators
4. Fast wind/program buttons
CASSETTE PLAYER OPERATION
The cassette mechanism is an
NOTE: Due to the abrasive nature of cassette tapes some oxide from the tape will be deposited on to the cassette heads and rollers and therefore the mechanism will need cleaning at regular intervals. Cleaning cassettes can be purchased from most good
7