Altec Lansing VS2320 manual Box Contents, Placing Speakers, Making Connections, Headphones

VS2320

Two-Piece Powered Audio System

Thank you for purchasing this Altec Lansing product. For generations, Altec Lansing has been first in audio innovation. Today, our line of powered speakers has received more performance awards than any other brand. In all kinds of environments, in every price range, Altec Lansing offers sound of distinction — giving even the most demanding customers the audio enjoyment they seek. Just listen to this!

Box Contents

•Two speakers

•Color-coded cables

•User’s guide

•Quick connect instructions (located on inner-flap of the package)

Placing Speakers

Satellite Speakers

Arrange the satellite speakers to suit your listening tastes — from right next to the monitor to as far apart as the speaker cords allow.

For optimum sound, satellite speakers should be placed in a left/right configuration, preferably apart and at equal distance from the center of the listening area. This will offer the best stereo imaging and provide the most satisfying results.

Note: The satellite speakers ARE magnetically shielded and can be placed close to video displays such as TVs and computer monitors without distorting the image.

Making Connections

Warning: Do not insert the speaker system’s power plug into a wall outlet until all connections are made. Also, turn off audio source (i.e., your PC, MP3 player, Sony PlayStation, etc.) before connecting the outputs to the speaker system’s inputs.

To ensure first-time operation as expected, please carefully follow the connection sequences described below in the order indicated.

Console Gaming

(Requires the use of the Console Gaming Y-Adapter, which is not included. This adapter can be purchased at www.alteclansing.com.)

Most console game systems feature dual-RCA outputs. To connect your speakers, follow the steps below:

1.Make sure the power to your console gaming system is turned off.

2.The Console Gaming Y-Adapter has a lime green 3.5 mm stereo jack on one end and two RCA jacks on the other?one red and one white.

3.Locate the red and white RCA plugs on the end of the cable connected to the back of your console gaming system. Connect them to the matching red and white RCA jacks on the Console Gaming Y-Adapter.

4.Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the lime green input on the Console Gaming Y-Adapter.

Portable Audio Devices (MP3, Portable CD Players, etc.)

Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the headphone jack on your portable audio device.

POWERING ON

1.After all other connections are made, plug the AC power cord into a wall outlet. The speaker system is now ready to operate.

2.Turn on the audio source.

3.Turn on the speaker system by turning the master volume knob on the right satellite until you hear a click sound. An LED will light on the front of the right satellite when the power is ON.

Note: To avoid hearing a popping sound when you turn on your Altec Lansing speaker system, always turn on your audio source first.

Volume

The VOLUME knob on the right satellite controls the master volume. Turn the knob clockwise to increase the volume and counterclockwise to decrease the volume.

Tone Control

The second knob on the right satellite controls tone. Turn the knob clockwise to increase treble and counterclockwise to decrease treble.

Inputs

Various connection schemes between your audio source and the speaker system are available. Determine if you’ll be setting up the speaker system for PC audio/PC gaming, DVD playback, console gaming or with portable audio devices (such as MP3 or portable CD players), then skip to the appropriate section.

PC Audio/PC Gaming/DVD Playback

All PC sound cards have audio outputs. Typically, the outputs will be marked as “front output” and “rear output.” In some cases, slightly different terminology may be used. The sound card’s documentation should help you determine which outputs to use with your speaker system.

Connect the lime green 3.5mm stereo cable (hardwired into the right satellite) to the lime green input labeled “FRONT” on your sound card.

Headphones

To use headphones with the system, plug them into the labeled jack on the right satellite. When headphones are connected, the speaker system is muted.

Auxiliary Input

This auxiliary or secondary input is located on the front of the right satellite. Use it to connect any additional stereo audio source that has a line-out jack or a 3.5mm headphone jack, such as an MP3 player, a CD player, or a laptop. A line-out jack will ensure that the output is not amplified. Check the owner’s manual for your audio device for more information.

If the audio source features a 3.5mm headphone jack, follow the steps below:

•Set the volume on the audio source at mid-level.

•Set the volume on the speaker system at minimum level and adjust upward to a comfortable listening level.

If the audio source features red and white RCA jacks, you will need a cable that has RCA plugs on one end and a 3.5 mm stereo male plug on the other. This type of cable may be purchased at most electronics stores.

System Specifications*

Altec Lansing’s superior sound comes from our patented Dynamic EQ technology, which utilizes custom-built, high-fidelity drivers, state-of-the-art equalization circuitry, and a harmonious mix of the following specifications:

Sound Pressure Level (SPL):		89 dB	Frequency Response:	85 Hz – 18 kHz (-10 dB)
Total Continuous Power:		5 Watts RMS	Signal to Noise Ratio
			@ 1 kHz input:	> 70 dB
	• Front Speakers:	2.5 Watts/channel @ 4 ohms
		@ 10% THD @ 20 Hz – 20 kHz (-3 dB)	Drivers (per satellite):	One 3" full-range driver
		2 Channels Loaded

*Power rating conforms to FTC Amplifier Rule #16 C.F.R. Part 432.

2