Installations and connections
Installing the ink film
1 |
Open the control panel.
Insert the orange gear into the left slot of the main unit.
2 |
3 |
Open the back cover.
Insert the ink film.
Insert the white gear into the right slot of the main unit.
4 If the ink film is slack, tighten it by winding this gear (orange).
5
6
Close the back cover pressing
“ ” down on both sides until it clicks into place.
Close the control panel.
When the unit runs out of ink film, the following message will be displayed.
フィルムガシナクナリマシタ コウカンシテクダサイシU 2 3
フィルムガシナクナリマシタ ヒンバン : KX̶F AN190
Install a new ink film.
Replacement ink film: | ¥714 |
| |
| ¥1,208 |
・As of February 2007. | ・Tax included. |
4