UNPACKING
IMPORTANT: Protect the Loudspeaker
The loudspeaker cone assemblies are fragile and should not be touched.
Step 1
Before removing the protective shipping material, look for obvious signs of shipping damage such as severely crushed corners or deep punctures that may have marred the speaker cabinet. If severe damage
has occurred, immediately contact the shipping company to file a claim.
Step 2
Using a knife, carefully cut away any plastic which is holding the
Step 3
Use snips to cut the straps holding the cardboard- encased speaker to the pallet.
Step 4
Open top of box and then slide the box up off of the speaker. The grill and horn mounting brackets are packaged separately inside the shipping box.
Step 5
Remove the protective cardboard, foam, and plastic packaging material.
IMPORTANT: Use Caution when Moving the Loudspeaker
Because each A7 weighs approximately 200 pounds, use caution when moving the loudspeaker to avoid personal injury. Use multiple people or a dolly and protective blankets when moving the loudspeaker off of the pallet and to its final location.
IMPORTANT: Retain the Packaging Material
If there is a need to return the loudspeaker under warranty conditions, you will need the packaging material to properly repackage the loudspeaker for transit.
030519 A7 Owner's Manual | 2 |