Furuno manual Accessing the FAX mode, FAX-30, top view, Display selection window

Page 17

1. OVERVIEW, SETUP

1.1.3Accessing the FAX mode

1.Turn on the FAX-30 at the ship’s mains switchboard. The FAX-30 proceeds in the following sequence:

a)The FAX-30 starts initial set up, which takes about 15 seconds.

b)The FAX-30 transfers (loads) data from the ROM to the RAM. At this time the LED flashes every 0.4 seconds.

c)After all data has been loaded, which takes about two minutes, the LED flashes every two seconds, indicating the FAX-30 is ready for operation.

LED (green)

FAX-30, top view

2. Press the [DISP] key to show the display selection window.

Fax mode icon

RADAR PLOTTER SOUNDER NAV DATA OVERLAY EXT VIDEO WXFAX

HOTPAGE 1 HOTPAGE 2 HOTPAGE 3 HOTPAGE 4 HOTPAGE 5 HOTPAGE 6

·TURN KNOB TO SELECT MODE AND PUSH KNOB TO ENTER.

·PUSH ANY SOFTKEY TO SELECT IMAGE SOURCE.

Display selection window

3.Rotate the [ENTER] knob to choose the WXFAX icon.

4.Push the [ENTER] knob to show the fax standby display.

Note 1: The FAX-30 cannot be accessed during the 15-second start up period which occurs after the power has been turned on.

Note 2: If the FAX-30 is not connected to the NavNet display unit when the display unit is powered, the message “AUX SOURCE IS DISCONNECTED. PUSH ENT KNOB TO EXIT.” appears. Check connections between the FAX-30 and the NavNet display unit.

Note 3: “LOAD IMAGES” is displayed while the FAX-30 is loading data.

1-3

Image 17
Contents Facsimile Receiver First E D I T I O N Safety Instructions Safety Instructions for the Installer Table of Contents Navtex Operation Navnet Appendix Word to the Owner of the FAX-30 FeaturesForeword Vii Operational CharacteristicsGeneral NavNetViii Network installation System ConfigurationNetwork installation Facsimile Receiver PC installationName Type Code No Qty Remarks Equipment ListsStandard supply Name Type Code No Remarks Optional supply Xii Overview, Setup NavNet OVERVIEW, SetupControls ControlsSelect sentence window Preparations for using the FAX-30Display selection window Accessing the FAX modeFAX-30, top view Receive mode setup screen Choosing the receive modeRX mode options Standby displayRX notice options Receive notificationFacsimile receiver top display Overview, Setup PCAccessing the FAX-30 top display Standby displays Logging out RX ModeAutomatic Receiving FAX Operation NavnetChoosing channel Thumbnails of received imagesStation options Example stations of northwest pacific Fax channel setup windowZone options Frequency entry window Channel options Example JMH/TokyoFacsimile receiving display Previewing image being receivedStopping automatic receiving Start RX options Manually Starting, Stopping ReceivingManually starting receiving Manually stopping receiving Wrong Speed or IOC and ImageWrong speed 60 chosen instead Wrong speed 120 chosen insteadSetting timer receiving schedule Timer ReceivingTimer setup screen Timer schedule listStation options Example N Pacific W Part Timer schedule menuIOC options Channel options Example station JMHDrum speed options Start time entry windowSave window Start timer optionsEnd time entry window Clear all options Turning on/off specific timer programsClearing all timer programs Facsimile image Displaying Facsimile ImagesExample of phase mismatching Phase mismatchPhase entry window Processing Facsimile ImagesExample of phasing signal out of synchronization Phasing signal out of synchronizationNoise rejection Sync entry windowImage format Image colorColor options Reverse image optionsZooming images Erasing Facsimile ImagesRotating images Erase image optionsPreventing Erasure of Facsimile Images Edit facsimile station menu Adding Facsimile ChannelsFAX-30 top 2. Press the Edit WX FAX Station soft key Station options Example stations of northwest pacific Frequency, call sign and station name entry windows FAX Operation PC Channel setup menuStarting receiving Stopping receivingTimer program list Setting, changing timer receiving scheduleTimer program menu Timer Program No.2Turning on/off specific timer programs Top Facsimile standby displayPhase Sync options Example of phasing signal out of synchronizatioColor Saving images Lock options LockEdit station list menu Edit Station ListThis page intentionally left blank About Navtex Messages Navtex Operation NavnetMessage categories Receiving navtex messagesRX setup menu Setting Up Navtex Stations, Messages, AlarmsNavtex message data display Navtex frequency optionsNavtex message options Navtex station mode optionsNavtex station options Alarm warning msg options Max error rate entry windowAlarm SAR MSG options Navtex message preview display Previewing Incoming Navtex MessagesNavtex message selection screen Sample navtex message Displaying Navtex MessagesDisplaying navtex messages Remarks on navtex messages KHz stations of nav area Displaying the Navtex Station ListNav areas for 490 kHz navtex stations Edit station menu Adding Navtex StationsEdit navtex station menu Nav area selection windowLatitude entry window Station name entry windowStation ID1 entry window Navtex Operation PC RX Setup Setting Up Navtex Stations, MessagesReceived messages click to display Navtex standby displayNavtex station list 490kHz Station ListEdit station list Cullercoats Editing Navtex StationsDeleting Navtex Stations This page intentionally left blank Maintenance MAINTENANCE, TroubleshootingMaintenance points Check Point ActionTroubleshooting Replacement of FuseTroubleshooting Trouble Problem RemedyFAX-30 menu Diagnostics NavNetSystem setup menu Diagnostic test results Diagnostics PCClear all images options Clearing Data NavNetClear memory menu Clear memory options Clearing Data PCFAX-30, cover opened All Clear for technicians onlySimulation setup menu Simulation ModeAccessing the simulation mode through NavNet SIMULATION§ Setup WX FAX §SIMULATION Live Navtex Simulation Accessing the simulation mode through PCThis page intentionally left blank Facsimile Receiver InstallationMounting dimensions of facsimile receiver FAX-30 Antenna wiring and preamp status Wire antenna or whip antennaAntenna Unit General antenna connectionHow to mount the preamp unit FAX-5 Installation of preamp unit FAX-5 optionWiring WiringGround wire Power cableWire or whip antenna Attachment of antenna connectorFAX-30, top view, cover removed Supplying Power to the Preamp UnitJIS cable specifications Browser settings Browser, PC SettingsInternet Explorer Version Netscape Navigator VersionIP address PC settingsFAX-30 Facsimile Stations AppendixFacsimile station map AP-1Zone AP-2Facsimile station list alphabetical order AP-3Navtex stations map Navtex StationsAP-4 Location of navtex stationsAP-5 Navtex stations listAP-6 VII AP-7XII AP-8NavNet menu tree Menu TreeAP-9 Soft keysMenu key AP-10Facsimile menu tree PC Menu treeAP-11 Navtex menu tree AP-12Specifications of Facsimile Receiver This page is intentionally left blank Packing List FAX-30-J/E-AP FAX-30-J/E-N Page Page Page Page Page IN-1 IndexIndex IN-2
Related manuals
Manual 115 pages 12.58 Kb