Section 1 - Product Overview
Rear Panel (Connections)
Drive Eject Lever
Power Receptacle
Reset Button
Power Receptacle:
The supplied power adapter connects here.
Drive Eject Lever
Ethernet Port
Ethernet Port:
A Gigabit Ethernet port that connects the
Drive Eject Lever:
Use the provided levers to eject the hard drives. The front panel must be removed before ejecting the drives.
Reset Button:
A pinhole button located beside the Ethernet socket is used to reset the system or restore the factory default settings. Note: After resetting the unit you will still be able to access the data on your hard drives.