Auto Mode, Menu, Level | Airlink AWLH3025 specs

Preferred		Type in the SSID of the target device you want to connect to.
SSID
BSS Type		You can select the connection type: Peer-to-Peer, Access Point or
		Auto Mode.
Tx Rate		You can select the data rate or set to auto mode from the pull-down
		menu.
Channel		Select the channel you want to use.
Power Mode		No Power Save：the adapter will be in full active mode.
		Max Power Save：the power save mode will be enabled.

4x Config		Select to disable or enable the TI-Based4x function.
Tx	Power	Select the transmit power level: Low Power, Medium-Low Power,
Level		Medium Power, Medium-High Power, High Power. The power
		level function is used to extend the communication distance.
Mode		Select from 802.11b, 802.11b+, 802.11g, or B&G Mode (If you
		choose this option the wireless network adapter will automatically
		select the suitable standard).
Profile		Enter the profile name and click the Save button to save your

		configuration, To open the profiles you saved, select the profile
		from the pull-down menu and then click the Load button.
		- 14 -

Auto Mode.