Linksys HomeLink Series | Linksys USB200HA manual

Linksys HomeLink™ Series

8.Click on the Identification tab. Type your Computer Name in the Computer Name field. Make sure you choose a name that is unique from the other computer names on the network, e.g., Dad, Upstairs_PC, etc.

Note: Your Computer Name and Workgroup Name must both be less than 15 characters, and must only consist of numbers and letters. Every Computer Name for each PC on the network must be different from all the other PCs’ Computer Names on the network.

9.Type your Workgroup Name in the Workgroup field. The Workgroup name must be the same Workgroup Name used by all the other PCs on the network. Do not click OK when you are done.

Phoneline 10M USB Network Adapter

10.Optional: Enter a description of your computer in the Computer Description field. You may leave this field blank if you wish.

11.Optional: Choose the Access Control tab. Make sure that Shared-level access control is selected. If the setting is on User-level access control and you can’t change it, see Troubleshooting problem 4 on page 22.

12.Click OK. Your PC may ask for your Windows 98 CD-ROM or the loca- tion of the Windows 98 installation files. If it does, direct Windows to the appropriate location, e.g., D:\win98 if you have the Windows 98 CD- ROM, or C:\windows\options\cabs if you don’t.

13.Once Windows has copied those files, the System Settings Change win- dow appears. Remove your driver disk from the floppy drive and click Yes to restart your PC. If you don't see this window, click on your Start button, then choose Shut Down, select Restart, and click OK to restart your PC.