Wireless-G PCI Adapter with SRX
WPA Personal offers two encryption methods, TKIP and AES, with dynamic encryption keys. Select one of these methods. Then enter a passphrase.
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption
Passphrase - Enter a Passphrase, also called a
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
WPA2 - Personal Needed for Connection
AES is automatically used as the encryption method. Enter a passphrase on this screen.
Passphrase - Enter a Passphrase, also called a
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
2.After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect to Network to connect to your network.
Congratulations! Setup is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to “Chapter 5: Using the Wireless Network Monitor.”
Chapter 4: Setting Up and Connecting the
Figure 4-9: WPA-Personal Needed for Connection
Figure 4-10: WPA2-Personal Needed for Connection
Figure 4-11: Congratulations Screen
10
Setting Up the Adapter