Linksys WMP54GX manual Wep

Page 19

Wireless-G PCI Adapter with SRX

4.The Wireless Security screen will appear.

If your wireless network doesn’t use wireless security, select Disabled and then click the Next button to continue. Proceed to Step 5.

From the Security drop-down menu, select the security method you want to use: WEP, WPA Personal, WPA2 Personal, WPA Enterprise, or RADIUS. WEP stands for Wired Equivalent Privacy, and WPA uses a security standard stronger than WEP encryption. RADIUS stands for Remote Authentication Dial-In User Service. Then proceed to the appropriate instructions for your security method.

WEP

Select a level of WEP encryption to use, and then enter a passphrase or WEP key.

WEP - To use WEP encryption, select 64-bit or 128-bit characters from the drop-down menu.

Passphrase - Instead of manually entering a WEP key, you can enter a passphrase in the Passphrase field, so a WEP key is automatically generated. This case-sensitive passphrase must match the passphrase of your other wireless network devices and is compatible with Linksys wireless products only. (If you have any non- Linksys wireless products, enter the WEP key manually on those products.)

WEP Key- The WEP key you enter must match the WEP key of your wireless network. If you are using 64-bit WEP encryption, then the key must consist of exactly 10 hexadecimal characters. If you are using 128-bit WEP encryption, then the key must consist of exactly 26 hexadecimal characters. Valid hexadecimal characters are “0” to “9” and “A” to “F”.

Advanced Users:

TX Key - The default transmit key number is 1. If your network’s access point or wireless router uses transmit key number 2, 3, or 4, select the appropriate number from the TX Key drop-down box.

Authentication - The default is set to Auto, where it auto-detects for Shared Key or Open system. Shared Key is when both the sender and the recipient share a WEP key for authentication. Open key is when the sender and the recipient do not share a WEP key for authentication. All devices on your network must use the same authentication type.

Click the Next button to continue to the Confirm New Settings screen or the Back button to return to the previous screen.

Chapter 4: Setting Up and Connecting the Wireless-G PCI Adapter with SRX

Figure 4-16: Wireless Security Screen

Figure 4-17: Wireless Security - WEP Screen

13

Setting Up the Adapter

Image 19
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use This User GuideWord definition Table of Contents Wireless-G PCI Adapter with SRX Adapter’s LED Adapter’s Connectors for the Antenna CablesWPA2-Personal Needed for Connection Adapter a device that adds network functionality to your PC IntroductionWelcome What’s in This User Guide?Introduction What’s in This User Guide? Topology the physical layout of a network Planning Your Wireless NetworkNetwork Topology RoamingNetwork Layout Overview Getting to Know the Wireless-G Notebook Adapter with SRXLED Indicator Cable ConnectorsSetup Wizard’s Welcome Screen Starting the Setup WizardWindows will begin copying the files onto your PC Installing the AdapterAvailable Wireless Network Screen Setting Up the AdapterWEP Key Needed for Connection Setting Up the Adapter with an Available NetworkWPA-Personal Needed for Connection 12 Available Wireless Network Screen Setting Up the Adapter with Manual Setup14 Wireless Mode Screen WEP 19 Wireless Security WPA2 Personal Screen EAP-TLS Radius 23 Confirm New Settings Screen Link Information Screens Using the Wireless Network MonitorAccessing the Wireless Network Monitor Wireless Network Status screenMore Information Wireless Network Status Screen Wireless Network StatusMore Information Wireless Network Statistics Screen Wireless Network StatisticsSite Information Site SurveyWPA2-Personal Needed for Connection Profiles Screen Profiles12 Create a New Profile Creating a New Profile14 Available Wireless Network Screen 16 WPA-Personal Needed for Connection 20 Network Settings Screen 21 Wireless Mode Screen 24 Wireless Security Screen 27 Wireless Security WPA2 Personal Screen 28 Wireless Security WPA Enterprise Using EAP-TLS Screen Radius 32 Congratulations Screen Common Problems and Solutions Appendix a TroubleshootingWireless-G PCI Adapter does not work properly What Ieee 802.11b features are supported? Frequently Asked QuestionsWhat is the Ieee 802.11b standard? What is the Ieee 802.11g standard?What is ISM band? What is ad-hoc mode?What is infrastructure mode? What is roaming?What is RADIUS? What is DSSS? What is FHSS? And what are their differences?What is WEP? What is WPA?Figure B-1 Wireless Network Monitor Icon Appendix B Using Windows XP Wireless Zero ConfigurationFigure B-4 Available Wireless Network Figure B-6 Network Connection Wireless Security Security Precautions Appendix C Wireless SecuritySecurity Threats Facing Wireless Networks Appendix C Wireless Security Wireless-G PCI Adapter with SRX Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Appendix E Glossary Wireless-G PCI Adapter with SRX Wireless-G PCI Adapter with SRX Appendix F Specifications Storage Temp Operating TempOperating Humidity Max % Non-Condensing Storage Humidity Limited Warranty Appendix G Warranty InformationFCC Statement Appendix H Regulatory InformationSafety Notices Appendix I Contact Information