Wireless-N USB Network Adapter
4.If you chose Infrastructure Mode, go to Step 5 now. If you chose
Standard Channel - Select the correct channel for your wireless network. The channel you choose should match the channel set on the other devices in your wireless network. If you are unsure about which channel to use, keep the default setting Auto.
Click the Next button to continue. Click the Back button to change any settings.
5.If your wireless network doesn’t have wireless security, select Disabled and then click the Next button to continue. Proceed to Step 6.
If your wireless network has wireless security, select the method of security used: WEP, PSK, PSK2, PSK+RADIUS, PSK2+RADIUS, or RADIUS. WEP stands for Wired Equivalent Privacy, and PSK stands for Pre- shared key. PSK2 stands for
Proceed to the appropriate section for the security method used on your network: WEP, PSK, PSK2, PSK+RADIUS, PSK2+RADIUS, or RADIUS.
WEP
WEP - Select
Passphrase - Enter a passphrase in the Passphrase field, so a WEP key is automatically generated. It is case- sensitive and should not be longer than 16 alphanumeric characters. This passphrase must match the passphrase of your wireless network and is compatible with Linksys wireless products only. (If you have any
WEP Key - The WEP key you enter must match the WEP key of your wireless network. For
Chapter 4: Setting up and Connecting the
Figure 4-12: Ad-Hoc Mode Settings
Figure 4-13: Wireless Security - WEP
12
Setting up the Adapter