Wireless-N USB Network Adapter
the passphrase of your wireless network and is compatible with Linksys wireless products only. (If you have any
WEP Key - The WEP key you enter must match the WEP key of your wireless network. For
Then click Connect and proceed to Step 3.
•PSK
If your network has the wireless security PSK enabled, this screen will appear. You must enter the same security settings used on your network.
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption
•PSK2
If your network has the wireless security PSK2 enabled, this screen will appear. You must enter the same security settings used on your network.
3.After the software has been successfully installed, the Congratulations screen will appear. Click Finish to return to the Link Information screen.
Congratulations! The profile has been successfully configured.
Chapter 5: Using the Wireless Network Monitor
Figure 5-12: PSK Needed for Connection
Figure 5-13: PSK2 Needed for Connection
Figure 5-14: Congratulations
24
Create a New Profile